Bedienungsanleitung Samson MDR16 (Seite 8 von 32) (Englisch)

24757

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Front and Rear Panel Layout

REAR PANEL

AC ADAPTER INLET

– Connect External AC power

AC ADAPTER INLET – Connect External AC power AC ADAPTER INLET

supply here.

POWER

– Switches on the MDR16’s main power.

PHANTOM

– Engages the 48-Volt Phantom

power supply to microphone pre-amps.

























43 MONO OUT

– The Left and Right main Mix outputs are

summed together to a monaural signal and sent out this

connector.

44 EQ IN/OUT

– When pressed in, the Amber LED will illu-

minate indicating that the Graphic Equalizer is active.

45 AUX RETURN 2

–

This control knob is used to adjust

the level of the signal connected to the AUX RETURN 2

inputs.

EQ TO AUX -

When pressed in, the onboard Graphic

Equalizer is switched from the main mix to the AUX 1

output.

SOLO (AUX RETURN 2

) -

Back-lit LED switch used to

assign the AUX RETURN 2 bus to the SOLO bus.

48 +48 PHANTOM POWER LED

– Indicates that the 48 Volt

Phantom Power is on.

49 POWER LED

– Indicates the MDR16 is powered up.

50 SOLO LED

– Indicates SOLO is selected.

51 PFL LED

– Indicates the SOLO is in PFL (Pre-Fader Level)

mode.

52 OUTPUT METER

– Twelve-segment display with VU bal-

listics indicates main Mix level.

DSP AUX 1 -

This control knob is used to adjust the level

of the internal DSP effect in the AUX 1 outputs

DSP ON –

This push switch is used to engage the

onboard DSP effects.

55 DSP PRE-SET SELECT

– Used to switch between the 8

pre-sets of the internal DSP effects processor.

56 SOLO Switch (3/4 Bus)

– Back-lit LED switch used to

assign the 3/4 Bus to the SOLO bus.

57 SOLO/PFL Switch

– Used to change the operating mode

of the SOLO bus from SOLO to PFL (Pre Fader Listen).

58 3/4 TO MIX Switch

– When engaged, the LED lights and

the input channels which are assigned to 3/4 will be

mixed together with the Main Left and Right Outputs.

59 MIX MUTE Switch

– When the switch pressed, the red

LED lights indicating the Main Left and Right outputs are

fully attenuated.

60 SOLO DEFEAT Switch

– This global control, back-lit

switch is used to disconnect all channels from the SOLO

bus.

61 MIX L R FADER

- Used to control the overall volume of

the Left and Right main Mix outputs.

62 HEADPHONE JACK

– Connect stereo headphones here.

62 HEADPHONE JACK – Connect stereo headphones here. 62 HEADPHONE JACK

63 C ROOM + HEADPHONE

– Adjusts the volume of the

control room speakers or headphones.

64 SOLO LEVEL

– A rotary control knob used to set the

overall volume of the SOLO bus.

65 MIX/2TK

– Switches between the main Mix and the 2

Track in the Control Room output.

66 OUTPUT 4 FADER

– Used to control the overall volume

of the bus 4 mix output.

67 OUTPUT 3 FADER

– Used to control the overall volume

of the bus 3 mix output.

68 OUTPUT 2 FADER

– Used to control the overall volume

of the bus 2 mix output.

69 OUTPUT 1 FADER

– Used to control the overall volume

of the bus 1 mix output.

70 1/2 TO MIX

– When engaged, the LED lights and the

input channels which are assigned to 1/2 will be mixed

together with the Main Left and Right Outputs.

71 SOLO (1/2 Bus)

– Back-lit LED switch used to assign the

1/2 Bus to the SOLO bus.

DSP 3/4 –

This control knob is used to adjust the

level of the internal DSP effect in the Bus 3/4 out-

puts

73 SOLO (AUX RETURN 1)

– Back-lit LED switch used to

assign the AUX RETURN 1 to the SOLO bus.

DSP 1/2 -

This control knob is used to adjust the

level of the internal DSP effect in the Bus 1/2 out-

puts

75 DSP PEAK LED

– LED light illuminates when the signal

sent to the internal DSP is clipped.

76 AUX RETURN 1 Knob

– Used to mix in level of the

external effects connected to the Aux RETURN 1 inputs.

3/4 ASSIGN

– LED, back-lit switch used to assign the

channel to the 3/4 output bus.

1/2 ASSIGN

(Stereo Channels)

– LED, back-lit switch

used to assign the channel to the1/2 output bus.

SOLO Switch (Stereo Channels)

– Back-lit LED switch

used to assign the channel to the SOLO bus.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson MDR16 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info