Bedienungsanleitung Samsung CLP-310 serie (Seite 27 von 107) (Englisch)

465994

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

Getting started_27

assignment, or you are required to set a static IP, proceed to the

Setting IP address part before going to Configuring the

machine’s wireless network part after reviewing the following parts

on printing a Network Configuration Report.

• Ad-hoc mode : An Ad-hoc mode network provides peer to peer

communication. In an Ad-hoc mode network, wireless devices and

computers communicate directly with each other, without using an

access point. They can share files and machines, but may not be

able to access the Internet. The machine receives print jobs from

wireless computers directly.

If you know that you are connecting to an ad-hoc mode network without an

access point, proceed to the Setting IP address part before going to

Configuring the machine’s wireless network part after reviewing the

following parts on printing a Network Configuration Report.

Printing Configuration report

You can print a Network Configuration Report from the machine’s control

panel that will show the current machine’s network settings. This will help

you to set up a network and troubleshooting problems.

To print the report, you need to press and hold Stop for about 5

seconds.

Please review your machines User’s Guide to learn of additional details.

Using this Network Configuration Report, you can find your machine MAC

address and IP address.

For example:

MAC Address : 00:15:99:41:A2:78

IP Address : 192.0.0.192

Setting IP address

Firstly, you have to set up an IP address for network printing and

managements. In most cases a new IP address will be automatically

assigned by a DHCP (Dynamic Host Configuration Protocol Server) located

on the network.

In a few situations the IP address must be set manually. This is called a

static IP and is often required in corporate Intranets for security reasons.

• DHCP IP assignment: Connect your machine to the network, and wait a

few minutes for the DHCP server to assign an IP address to the

machine. (If the access point has an available LAN port, you may

connect your machine directly to the access point.) Then, print the

Network Configuration Report as explained above. If the report shows

that the IP address has changed, the assignment was successful. You

will see the new IP address in the report. Leave the machine attached to

the network.

• Static IP assignment: Use SetIP program to change the IP address

from your computer. If your machine has a control panel, you can also

change IP address using the machine's control panel.

In an office environment, we recommend that you contact a network

administrator to set this address for you.

IP setting using SetIP program

The following procedure is based on Windows XP.

This program is for manually setting the network IP address of your

machine using its MAC address to communicate with the machine. A

MAC address is the hardware serial number of the network interface and

can be found in the Network Configuration Report.

Installing the program

1. Insert the Printer Software CD-ROM provided with your machine.

When the driver CD runs automatically, close that window.

2. Start a web browser such as Internet Explorer and open the X drive.

(X represents your CD-ROM drive.)

3. Double-click Application > SetIP.

4. Double-click Setup.exe to install this program.

5. Click OK. If necessary, select a language from the drop-down list.

6. Follow the instructions in the window and complete the installation.

Starting the program

1. Connect your machine and the computer using crossover network

cable.

2. Temporarily disable the computer firewall before continuing by doing

the following:

3. From the Windows Start menu, select All Programs > Samsung

Network Printer Utilities > SetIP > SetIP.

4. Click on the icon (third from left) in the SetIP window to open the

TCP/IP configuration window.

• You only need to run this program if your network requires a

static IP address. Otherwise, you may proceed to the

Configuring the machine’s wireless network part of this

document. If you are unsure of this requirement ask the system

administrator or the person who has set up your local network.

• You can only use the SetIP program when your machine is

connected to a network or directly connected to a PC with the

crossover network cable included with your machine. In most

cases we recommend using the crossover cable. You will be

asked to connect this cable in a moment.

Windows XP

• Open Control Panel.

• Double click Security

Center.

• Click Windows Firewall.

• Disable the firewall.

Macintosh OS

• Open System

Preferences.

• Click Sharing.

• Click the Firewall menu.

• Turn firewall off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung CLP-310 serie Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung CLP-310 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info