Bedienungsanleitung Samsung CLP-310 serie (Seite 29 von 107) (Englisch)

465994

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

Getting started_29

3. Click

Wireless

and Select

Wizard

. Then, click

4. Select the one

Network Name(SSID)

in the list

•

SSID

: SSID(Service Set Identifier) is a name that identifies a wireless

network. Access points and wireless devices attempting to connect

to a specific wireless network must use the same SSID. The SSID is

case-sensitive.

•

Operation Mode

refers to the type of wireless

connections.

Ad-hoc

: allows wireless devices to communicate directly with each

other in a peer-to-peer environment.

Infrastructure

: allows wireless devices to communicate with each

other through an access point.

5. Click

If wireless security setting window appears, enter the registered

password (network key) and click

Wizard Setup Confirmation

window appears, please check your

wireless setup. If the setup is right, click

Apply

7. Click

Now go to Installing the driver software.

Installing the driver software

You must install the printer driver software for printing. The software

includes drivers, applications, and other user friendly programs.

If your IP assignment method is DHCP and IP address can be changed

whenever machine is turned on, we recommend you to use the Bonjour

program. Go to the http://developer.apple.com/networking/bonjour/

download/, select the program Bonjour for Windows according to your

computer operating system, and install the program. In case of Mac OS X,

this program might be already installed in your PC. This program will allow

you to fix the network parameter automatically. This Bonjour program does

not support Linux.

If your IP assignment method is static, follow the steps below.

1. Insert the Printer Software CD-ROM into your CD-ROM drive. The CD-

ROM should automatically run, and an installation window appears.

2. Click Next.

Wizard

will help you setup the wireless network configuration.

However, if you want to set the wireless network directly, select

Custom

If your network’s operation mode is

Infrastructure

, select the

SSID

of the access point. If the operation mode is

Ad-hoc

, select the

machine’s

SSID

. Note that “airportthru” is the default

SSID

of your

machine.

Disconnect the network cable (standard or crossover). Your

machine should then start communicating wirelessly with the

network. In case of

Ad-hoc

mode, you can use a wireless LAN

and wired LAN simultaneously.

Operation Mode

Infrastructure

, you must disconnect the

network cable to activate wireless network after completing the

network setting.

• The following procedure is based on Windows XP. The procedure

and popup window which appears during the installation may differ

depending on the operating system, machine features, or the

interface in use.

• Make sure that the network setup for your machine is completed.

(See "Setting up the network" on page 21.) All applications should

be closed on your computer before beginning installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung CLP-310 serie Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung CLP-310 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info