Bedienungsanleitung Samsung CLP-310 serie (Seite 28 von 107) (Englisch)

465994

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

28 _Getting started

5. Enter the machine’s new information into the configuration window

as follows:

• MAC Address : Find the machine’s MAC address from the Network

Configuration Report and enter it without the colons.

For example, 00:15:99:29:51:A8 becomes 0015992951A8.

• IP Address: Enter a new IP address for your printer the same as the

computer’s IP address except for the last number.

For example, if your computer’s IP address is 192.168.1.150, enter

192.168.1.X. (X is number between 1 and 254 other than the

computer’s address.)

• Subnet Mask: Enter this exactly the same as the computer’s Subnet

Mask.

• Default Gateway: Enter this exactly the same as the computer’s

Default Gateway.

6. Click Apply, and then click OK. The machine will automatically print

the Configuration report. Confirm that all the settings are correct.

7. Click Exit to close the SetIP program.

8. If necessary, restart the computer’s firewall.

Network parameter setting

You can also set up the various network settings through the network

administration programs.

• SyncThru™ Web Admin Service: Web-based printer management

solution for network administrators. SyncThru™ Web Admin Service

provides you with an efficient way of managing network devices and lets

you remotely monitor and troubleshoot network machines from any site

with corporate internet access. Download this program from http://

solution.samsungprinter.com.

• SyncThru™ Web Service: Web server embedded on your network print

server, which allows you to: (A) Configure the network parameters

necessary for the machine to connect to various network environments.

(B) Customize machine settings.

Restoring factory default settings

You can restore factory default settings to the machine by using SyncThru™

Web Service. You may need to reset the machine to the factory default

settings when machine that you are using is connected to new network

environment.

Restoring factory default settings using SyncThru™

Web Service

1. Start a web browser such as Internet Explorer, Safari or Firefox and

enter your machine’s new IP address in the browser window.

For example,

2. When the SyncThru™ Web Service window opens, click Network

Settings.

3. Click Reset. Then, click Clear for network.

4. Turn off and restart machine to apply settings.

Configuring the machine’s wireless network

Before starting you will need to know the SSID of your wireless network and

the Network Key if it is encrypted. This information was set when the access

point was installed. If you do not know about your wireless environment,

please ask the person who has set up your network.

Using SyncThru™ Web Service

Before starting wireless parameter configuration, make sure cable

connection status.

Configuring the printer’s wireless network

1. Start a web browser such as Internet Explorer, Safari or Firefox and

enter your machine’s new IP address in the browser window.

For example,

2. When the SyncThru Web Service window opens, click

Network

Settings

MAC address is a hardware serial number of the machine’s

network interface and can be found in the Network

Configuration Report.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung CLP-310 serie Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung CLP-310 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info