Bedienungsanleitung Sangean ATS-909X2 (Seite 9 von 19) (Englisch)

797034

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

3. Use the Rotary Tuning knob (16) or the numeric

buttons (19) to change the character and input your

desired character.

4. Press the Tuning Up / Down buttons (18) to go to the

next / previous character and repeat the instructions in

step 3 to edit the selected character.

5. If the name you want to enter is shorter than the

original name, use the Tuning Up / Down buttons

(18) and Cancel button (31) to select and erase any

unwanted characters.

6. Press the Enter button (30) to confirm the city name.

4. LISTENING TO THE RADIO

TUNING TO RADIO STATIONS

The ATS-909X2 is capable of tuning to radio stations on

the SW, MW, LW, FM and AIR bands. The radio features

an Automatic Tuning System (ATS) that can be used to

automatically store preset stations when the SW, MW, LW

or FM band is selected. When the AIR band is selected,

only manual tuning and scan tuning can be used to search

for stations and preset stations must be stored manually.

NOTE

Listening to airband frequencies (118-137 MHz) without

a license is prohibited in some countries. Only use this

device to listen to airband frequencies when this is

allowed under local laws and regulations.

NOTE

For the best reception, please make sure the telescopic

antenna on the back of the radio (33) is fully extended

when listening to the FM, SW or AIR band. When

listening to the SW, MW or LW band, make sure the

included external AM antenna is connected to the AM

EXT. ANT jack (36) and that the antenna is placed as

high as possible and is not being obstructed.

USING THE AUTOMATIC TUNING SYSTEM

(ATS) – MW / LW / FM

The Automatic Tuning System can be used to

automatically scan for radio stations with a strong signal

on the MW, LW or FM band and store these stations as

preset stations. Since the MW and LW share the same

button, simply press this button (21) twice to switch

between the medium wave and the long wave.

Follow these steps to use the Automatic Tuning System

on the MW / LW / FM band:

1. Turn on the radio using the Power button (10).

2. Press and hold either the ATS / MW / LW (21) or ATS /

FM (22) button to activate the Automatic Tuning System

for the corresponding band.

3. The radio will now search for all strong signals on the

selected waveband and store the stations it finds as

preset stations.

4. When the scan is completed, the radio will play the first

preset on the first page (which is the station with the

best reception).

NOTE

When using the ATS feature on the MW / LW / FM band,

all existing presets that have not been locked on that

waveband will be cleared.

NOTE

When using the ATS feature on the MW / LW / FM band,

the radio will store preset stations based on signal

strength. If more stations are found than there are

presets available, the stations with the weakest signals

will not be stored.

USING THE AUTOMATIC TUNING SYSTEM

(ATS) – SW ONLY

The Automatic Tuning System can also be used on the

SW band. The process for using it is slightly different from

the process on the other bands.

Follow these steps to use the Automatic Tuning System

on the SW band:

1. Turn on the radio using the Power button (10).

2. Press and hold the ATS / METER / SW button (20).

The message "ATS START- " will be shown in the Text

display (U).

3. Use the Rotary Tuning knob (16) to select the start

frequency from 1.7MHz to 29.9MHz.

4. Press the Step button (17) or Enter button (30) to

confirm the start frequency.

The message "ATS END- " will be shown in the Text

display (U).

5. Rotate the Rotary Tuning knob (16) to select the end

frequency from 2.7MHz to 29.9MHz. The end frequency

is always at least 1MHz higher than the selected start

frequency, as the selected ATS frequency range must

be larger than 1MHz.

6. Press the Step button (17) or Enter button (30) to

confirm the end frequency.

7. Rotate the Rotary Tuning knob (16) to select the

desired ATS preset page number.

By default, page 30 will be selected.

8. Press the Step button (17) or Enter button (30) to

confirm the page number.

9. When the scan is completed, the Text display (U) will

show the message "FINISHED", the selected preset

page will be renamed to "ATS-PRESET" and the first

preset on the selected page will automatically be

played.

NOTE

When using the ATS feature on the SW band, all existing

presets that have not been locked on the selected page

number will be cleared.

NOTE

When using the ATS feature on the SW band, the radio

will store preset stations based on signal strength. If

more stations are found than there are presets available

on a preset page, the stations with the weakest signal

will not be stored. If no stations are found during the

scan, the radio will tune to the start frequency of the set

ATS scan range.

NOTE

It is recommended to use a frequency range of

approximately 5MHz for ATS scans and repeat scanning

this range on different pages until no new presets are

found. This way, several preset pages can be populated

with presets and the entire SW band can be covered in

a quick manner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean ATS-909X2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean ATS-909X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info