Bedienungsanleitung Sangean ATS-909X2 (Seite 11 von 19) (Englisch)

797034

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

shown on the display and the broadcast will be played in

stereo if headphones are connected or an external device

is connected to the LINE OUT jack (38).

NOTE

The radio can be forced to play FM radio stations in

mono by using the "FM STEREO" setting in the menu.

This can help reduce noise when listening to FM

stations. More details on how to enable this feature can

be found in chapter 6 "USING THE MENU".

ADJUSTING THE VOLUME

The volume of the radio can be adjusted by rotating

the Volume Control knob (12) clockwise to increase the

volume or counterclockwise to decrease the volume.

USING PRESET STATIONS

The ATS-909X2 allows you to store up to 1674 radio stations

in the memory of the radio. The radio has three memory

banks that can each store up to 558 preset stations.

The following table gives an overview of the number of

stations that can be stored in one memory bank for each

of the wavebands:

WAVEBAND PRESET PAGES (9

PRESETS P PAGE)

TOTAL NO. OF

PRESETS

AIR 5 45

FM 4 36

MW 3 27

LW 1 9

SW 49 441

STORING PRESET STATIONS IN MEMORY

– MW / LW / FM / AIR

Follow these steps to save preset stations on the MW,

LW, FM and AIR bands:

1. Turn on the radio using the Power button (10).

2. Select the desired waveband by pressing the

corresponding button.

3. Tune to the station you want to store in the preset

memory as described earlier.

4. Press the Memo button (24).

The Memo indicator (X) and the first available preset

position (S) will now be blinking on the display.

5. To store the station at the first available position, press

the Enter button (30) to confirm and store the preset to

that position.

To store the station to a different preset position:

6. Press the Page button (27) to select the desired page.

7. Press any of the numeric buttons (19) to save the

station to the corresponding preset position.

NOTE

If another station has already been stored at a preset

position that is selected, then the station that was

previously stored at that preset position will be moved

to the rst available empty preset position (even if that

preset position is located on another page).

STORING PRESET STATIONS IN MEMORY

– SW ONLY

The procedure for storing stations on the SW band is

slightly different from the procedure for the other bands

described above. Follow these steps to store stations on

the SW band:

1. Turn on the radio using the Power button (10).

2. Select the SW band by pressing the SW button (20).

3. Tune to the station you want to store in the preset

memory as described earlier.

4. Press the Memo button (24).

The Memo indicator (X) and the first available preset

position (S) will now be blinking on the display.

5. To store the station at the first available position, press

the Enter button (30) to confirm and store the preset to

that position.

To store the station to a different preset position:

6. Use the Rotary Tuning knob (16) or Tuning Up / Down

buttons (18) to select a page number.

7. Now either press the Enter button (30) to save the

station to the first available position (S) on that page

or press any of the numeric buttons (19) to save the

station to the corresponding preset position.

If another station has already been stored at a preset

position that is selected, then the station that was

previously stored at that preset position will be moved

to the first available empty preset position on the same

page.

If a page on the SW band already has 9 stations preset

in the radio's memory, then you will have to either

select a different page manually or overwrite one of the

existing presets by pressing and holding the numeric

button of that preset position. Overwritten presets will

be moved to a different page if there are pages left with

available preset positions.

NOTE

Because shortwave reception can be affected by

weather conditions, radio stations on the shortwave

band may have different frequencies on which they can

be received depending on the conditions. It is therefore

a good idea to store several frequencies for the same

radio station on the same preset page, as the radio

will automatically scan for the preset with the strongest

signal when a page is selected on the SW band.

RECALLING PRESET STATIONS – MW / LW

/ FM / AIR

Follow these steps to recall a preset station on the MW,

LW, FM and AIR bands:

1. Turn on the radio using the Power button (10).

2. Select the desired waveband by pressing the

corresponding button.

3. Select the page that the preset station is on (if

applicable) by repeatedly pressing the Page button (27).

4. Press any of the numeric buttons (19) to recall the

corresponding preset station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean ATS-909X2 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean ATS-909X2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info