797034
15
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
14
GB
F
E
NL
D
the available settings and to select settings, while the
Step button (17) or Enter button (30) can be used start
configuring settings or confirm selected settings.
The following settings can be found in the menu:
MANUAL
/ RDS CT
[RDS CT]: Set the clock using RDS CT
when available.
[MANUAL]*: Set the clock manually and
ignore RDS CT.
FORMAT
[24H]*: Use the 24-hour clock format.
[12H]: Use the 12-hour clock format with
PM indicator.
BACK LIGHT
[LIGHT 10S]: backlight timeout 10
seconds.
[LIGHT 20S]*: backlight timeout 20
seconds.
[LIGHT 30S]: backlight timeout 30
seconds.
Use this setting to configure the
backlight timeout when using battery
power.
FM STEREO
[FM.ST AUTO]*: Use FM stereo mode
when available
[FM.ST MONO]: Force the radio to use
FM mono mode.
Use this setting to allow for stereo
playback (when headphones or an
external device are connected) or force
mono playback. Forcing mono can
sometimes help reduce noise.
SOFT MUTE
[S. MUTE ON]: FM softmute enabled.
[S. MUTE OFF]*: FM softmute disabled.
Softmute can reduce background hiss /
noise of fading FM signals.
MEMOBANK
A / B / C
[MEMOBANK A]*: Select memory bank
A.
[MEMOBANK B]: Select memory bank
B.
[MEMOBANK C]: Select memory bank
C.
The ATS-909X2 features 3 memory
banks each capable of storing 558
preset stations. Use all 3 of them to
store up to 1674 preset stations.
FM STEP
[FM 50kHz]: Tuning Up / Down button
FM tuning step 50kHz.
[FM 100kHz]*: Tuning Up / Down button
FM tuning step 100kHz.
[FM 200kHz]: Tuning Up / Down button
FM tuning step 200kHz.
FM RANGE
[FM 64-108 M]: Set the FM range to 64-
108 MHz.
[FM 76-108 M]: Set the FM range to 76-
108 MHz.
[FM 87-108 M]: Set the FM range to 87-
108 MHz.
This setting can be used to configure
the FM range, based on the country that
you are currently in.
SSB STEP
[SSB 10Hz]: Tuning Up / Down button
SSB tuning step 10Hz.
[SSB 20Hz]*: Tuning Up / Down button
SSB tuning step 20Hz.
BEEP ON /
OFF
[BEEP ON]: Turn on the confirmation
beep for certain operations.
[BEEP OFF]: Turn off the confirmation
beep for certain operations.
SCAN
DELAY
[P.SCAN 0.5S]: Set the page scan delay
to 0.5s.
[P.SCAN 1.0S]*: Set the page scan
delay to 1.0s.
[P.SCAN 1.5S]: Set the page scan delay
to 1.5s.
[P.SCAN 2.0S]: Set the page scan delay
to 2.0s.
This setting can be used to configure the
page scan delay for the AIR band. This
is the time the radio waits for a signal
on a preset frequency (when no signal
is being received) before continuing a
page scan.
VER XXX
This setting displays the software
version. The software version is only for
reference and cannot be changed.
FACTORY
[RESET NO]*: Do not perform a factory
reset.
[RESET YES]: Perform a factory reset.
A factory reset restores the clock time
/ alarm / menu settings to the factory
defaults. Preset stations and memory
banks will not be deleted.
Note: The default settings are indicated with an asterisk
(*).
7. OTHER FEATURES
USING ALARM TIMERS
SETTING AN ALARM TIMER
The ATS-909X2 features three alarm timers which can be
set when the radio is powered on or off using the timer
buttons (5). The alarm timers can be configured to use
either the radio's buzzer or a radio station to wake you up.
To set an alarm timer, follow these steps:
1. Press one of the timer buttons (5).
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sangean ATS-909X2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sangean ATS-909X2

Sangean ATS-909X2 Bedienungsanleitung - Deutsch - 20 seiten

Sangean ATS-909X2 Bedienungsanleitung - Holländisch - 21 seiten

Sangean ATS-909X2 Bedienungsanleitung - Französisch - 21 seiten

Sangean ATS-909X2 Bedienungsanleitung - Spanisch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info