Bedienungsanleitung Sangean U5DBT (Seite 11 von 16) (Englisch)

797386

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Selecting a le

1. While the USB memory device is playing, press

either the Next track button ( ) or Previous

track button ( ) to change to the desired le. The

le number is updated on the display. If there’s more

than one folder, all files in the current folder should

have been played and the next folder will be played.

2. Press and hold the Next track button ( ) or

Previous track button ( ) to fast-forward / Rewind

the current track. Release the button when the desired

point in the track is reached.

To skip to another folder

With the USB memory device is in pause or play mode,

press and release the Next folder button ( ) or

Previous folder button ( ). The rst le of the next or

previous folder will be played.

NOTE

If your USB contains a folder without files, the device

will skip the folder and play the les in the next folder.

Play Mode

When playing the les in the USB memory device, press

and release Play mode button to select:

Repeat 1 : repeatedly play the le you are listening to.

Repeat Folder : repeatedly play the les within the

folder you are listening to.

Repeat All : repeatedly play the folders in the USB.

Random : it will play les in the USB by in random.

Charging with USB socket

Your radio has a USB socket which is intended for charging

an iPhone, smart phone or similar devices. Charge time

may vary and in some cases may take longer to charge than

when using the manufacturers charging unit supplied with

the smart phone. The radio can charge the iPhone, smart

phone or similar devices when using AC power cord and the

radio is in power on or standby mode.

●The USB jack can only provide power for the USB

memory stick only with 1A 5V maximum and most of

iPhone models. However, it does not support external

Hard disk drive and all mobile phones and electronic

device.

●The charger may not supply power to some USB

devices.

● Do not connect power source to USB port. Otherwise

there is risk of re. The USB port is only intended for

charging lower voltage device.

●Do not insert a nail, wire, etc. into USB power supply

port. Otherwise a circuit short may cause smoke and

re.

● Do not connect this USB socket with your PC

USB port, as it is highly possible that it may cause

breakdown of the units.

●Never use the USB socket in rainy or moist conditions

to prevent moist from entering the radio.

IMPORTANT

Loudness On / Off

When the radio is switched on, press and hold the EQ

control button to get compensation on lower and higher

frequency. The effect will be more audible when the radio

is in lower volume level. The display will show “Loudness

on” when Loudness function is applied. To turn off the

loudness function, press and hold the EQ control button

again. The display will show “Loudness off”.

Equaliser function

1. Press the Power On / Off button to switch on your

radio.

2. Press the EQ control button to enter the EQ setting

menu.

3. Rotate the Tuning control knob to select your required

mode. Then press the Tuning control knob to conrm

the selection.

Set up My EQ prole

1. Press the Power On / Off button to switch on your

radio.

2. Press the EQ control button to enter the EQ setting

menu.

3. Rotate the Tuning control knob to select "My EQ…".

Then press the Tuning control knob to enter the setting.

4. Rotate the Tuning control knob to select “Treble” or

“Bass”. Press the Tuning control knob to enter the

setting.

5. Rotate the Tuning control knob to select your required

Treble level or Bass level. Press the Tuning control

knob to conrm the setting.

To prevent possible hearing damage, do not listen at

high volume levels for long periods or put your ears too

close to the speaker.

Please use the volume level responsibly with

respectable consideration of the situation and other

people or animals in the vicinity.

SAFETY AND COURTESY NOTE

Clock time setting

Setting the time format

1. Press the Power On / Off button to turn on the radio.

2. Press the Menu button to access FM

the menu for the current mode.

Rotate the Tuning control knob to

select “System” and press the Tuning control knob to

enter the system settings menu.

3. Rotate the Tuning control knob to System

<Time >

select “Time” and press the Tuning

control knob to enter the setting.

4. Rotate the Tuning control knob to Time

select “Set 12 / 24 hour” and press

the Tuning control knob to enter

the setting.

5. Rotate the Tuning control knob to select 12 or 24 hour

format and press the Tuning control knob to conrm the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U5DBT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U5DBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info