Bedienungsanleitung Sangean U5DBT (Seite 13 von 16) (Englisch)

797386

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

NOTE

If the time is not set before setting the alarms, “Time

is not set” will show on the display. Then Use the

Tuning control knob to set the time and date. When

the setting is complete, proceed to step 2.

Press the Tuning control knob to Alarm 1:Setting

enter the alarm setting. Alarm

status will ash on the display.

Rotate the Tuning control knob to select “On” or “Off”.

If “Off” is selected any current setting for that alarm

will be cancelled. With “On” selected, press the Tuning

control knob to cause the alarm hour digits to ash on

the display.

Rotate the Tuning control knob to Alarm 1:Time

10:00

choose the desired hour for the

alarm and then press the Tuning

control knob to cause the alarm minute digits to ash

on the display.

Rotate the Tuning control knob to Alarm 1:Time

10:00

choose the desired minute for the

alarm and then press the Tuning

control knob.

NOTE

If the radio has been set to the 12 hour clock format,

there will also be an option here for setting AM or PM

for t he alarm time. Rotate the Tuning control knob

to select AM or PM. Press the Tuning control knob to

conrm the setting.

Rotate the Tuning control knob to

Alarm 1:Mode

Buzzer

Alarm 1:Mode

Last listened

Alarm 1:Mode

1: 87.50MHz

choose the desired source for the

alarm (DAB, FM, Buzzer).

Press the Tuning control knob

when the desired source alarm is

highlighted on the display. If setting

alarm to Buzzer proceed to step 6.

For which ever radio mode is

selected, the radio alarm may be

set to any of the stations which have been stored as

presets or to the station last listened to. If setting the

alarm to a radio option, rotate the Tuning control knob

to choose either last listened or from presets 1-5.

NOTE

You can only set the alarm to use a preset which has

already been stored.

Press the Tuning control knob to conrm the selection.

The alarm day option will ash on the display.

6. Your alarm can be set to sound Alarm 1:Day

Once

once, daily, weekdays and

weekends.

Once - Will sound at one time only.

Daily - Will sound every day.

Weekdays - Will sound only on weekdays.

Weekends - Will sound only on weekends.

Rotate the Tuning control knob to choose the day

option and then press the Tuning control knob to

conrm the setting.

● If setting alarms to daily, weekdays or weekends

proceed to point 10. If selecting the alarm to once

you will need to set the day, month and year options

as described below.

7. Rotate the Tuning control knob to

Alarm 1:Date

17- 5-2018

select the correct day and then

press the Tuning control knob to

conrm the setting.

8. Rotate the Tuning control knob to Alarm 1:Date

17- 5-2018

select the correct month and then

press the Tuning control knob to

conrm the setting.

9. Rotate the Tuning control knob to

Alarm 1:Date

17- 5-2018

select the correct year and then

press the Tuning control knob to

conrm the setting.

10. Rotate the Tuning control knob to Alarm 1:Volume

Alarm 1

Saved

10:06

17-5-2018

choose the desired volume and

press the Tuning control knob to

confirm the setting. Your radio

will show “Alarm 1 Saved” and

will exit the alarm setting

procedure. Active alarms are

indicated in the display by the alarm “A” symbol.

NOTE

You can also press and hold the Alarm 1 button or

Alarm 2 button to activate or disable the alarms.

When the alarm sounds

The alarm will sound at the selected times for up to 60

minutes unless cancelled. The maximum volume used

for the alarm will be specified during the alarm setting

procedure. When your radio is set to wake by the radio

alarm, your radio will switch to the selected radio station. If

the radio cannot connect to the specied the radio station,

the buzzer will be used instead.

To cancel a sounding alarm, press the Power On / Off

button to cancel a sounding alarm.

If the radio is switched on because of a radio alarm you

can control basic functions such as the volume control.

When the alarm activates it will start softly and

gradually increase in level. The radio will automatically

switch back to standby mode when the 60 minutes

have elapsed.

NOTE

Snooze timer

1. When the radio alarm sounds, pressing any button

other than the Volume control will silence the alarm

for the selected number of minutes. When the buzzer

alarm sounds, press any button. This will silence the

alarm for the selected number of minutes. The Snooze

time can be adjusted between 5 and 20 minutes in 5

minute increments. Default setting is 5 minutes.

2. The snooze duration can only be set while the radio is

playing. To adjust the silence time for the snooze timer,

press the Menu button to access the menu for the

current mode.

3. Rotate the Tuning control knob to FM

select “System” and press the

Tuning control knob to enter the system settings menu.

4. Rotate the Tuning control knob until System

'Snooze Duration' is shown on the

display. Press the Tuning control knob to enter the setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U5DBT Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U5DBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info