Bedienungsanleitung Sangean U5DBT (Seite 14 von 16) (Englisch)

797386

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

5. Rotate the Tuning control knob to

Snooze Duration

<5 Minutes

choose the desired snooze time to

5, 10, 15 or 20 minutes. Press the Tuning control knob

to conrm the setting.

6. In order to cancel the Snooze timer while the alarm is

suspended, press the Power On / Off button.

Sleep function

Your radio can be set to turn off after a preset time has

elapsed. The sleep setting can be adjusted between 15

and 120 minutes. Ensure your radio is switched on.

To set the desired sleep time, press the Menu button to

enter the menu of the current mode.

Rotate the Tuning control knob until FM

Set sleep time

15 minutes

“Sleep” is shown on the display.

Press the Tuning control knob to

enter the setting. The sleep

settings available are 15, 30, 45, 60, 90 or 120 minutes.

Press the Tuning control knob to confirm the setting.

The display will exit the sleep options. The sleep

symbol ‘S’ will show on the display. Your radio will

switch off after the preset sleep time has elapsed.

To cancel the sleep timer and

Set sleep time

Sleep off

switch off your radio before the

chosen sleep time has elapsed, press the Power On /

Off button. To cancel the sleep timer without switching

off your radio, go back to the sleep timer settings (step

1 to 2) and select the “Sleep off” option in step 2.

To view the remaining time of an active sleep timer on

the display, press the Menu button to enter the menu

of the current mode. Rotate the Tuning control knob

until “Sleep” is shown on the display and then press the

Tuning control knob.

Brightness control

The brightness of the display can be adjusted for when

the radio is in standby and for when it is in use. If you use

the unit in the bedroom, you may prefer a lower standby

brightness level than a higher brightness setting.

1. Press the Power On / Off button to switch on your

radio.

2. Press the Menu button to access the menu for the

current mode.

3. Rotate the Tuning control knob to FM

select “System” and press the

Tuning control knob to enter the system settings menu.

4. Rotate the Tuning control knob to

System

select “Backlight” and press the

Tuning control knob to enter the setting menu.

5. In Backlight menu, there are 3 Backlight

Backlight

Backlight

settings:

Timeout: to adjust the length of

time before the backlight turns off.

Power On level: to adjust the

brightness when the radio is in use.

Standby level: to adjust the brightness when the radio

is in standby.

Rotate the Tuning control knob to select your option

and press the Tuning control knob to confirm your

setting.

Language selection

By default your radio will display all menus and messages

in English. You can choose your preferred language.

1. Press the Power On / Off button to switch on your

radio.

2. Press the Menu button to access the menu for the

current mode.

3. Rotate the Tuning control knob to FM

select “System” and press the

Tuning control knob to enter the system settings menu.

4. Rotate the Tuning control knob to

System

select “Language” and press the

Tuning control knob to enter the language adjustment

menu.

5. Rotate the Tuning control knob until your desired

language appears on the display. Press the Tuning

control knob to confirm your choice. The display will

change to the chosen language. The chosen language

will be marked with an asterisk.

Factory reset

If your radio fails to operate or some digits on the

display are missing or incomplete, carry out the following

procedure.

1. Press the Power On / Off button to switch on your

radio.

2. Press the Menu button to access the menu for the

current mode.

3. Rotate the Tuning control knob to FM

select “System” and press the

Tuning control knob to enter the system settings menu.

4. Rotate the Tuning control knob to System

select “Factory Reset” and press

the Tuning control knob to enter the setting.

5. Rotate the Tuning control knob to Factory Reset?

Yes <No>

select “Yes” or “No”. If you do not

wish to carry out a system reset, select “No” and then

press the Tuning control knob to conrm the setting.

6. With “Yes” selected, press the

Factory Reset?

<Yes> No

Tuning control knob. A full reset will

be performed. All presets and station lists will be

erased. All settings will be set to their default values.

After a system reset, the radio will be restarted.

The display will show “Welcome to Digital Radio” and

a scan of the DAB band III will be performed. In case

of malfunction due to electrostatic discharge, reset

the product (reconnection of power source may be

required) to resume normal operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U5DBT Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U5DBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info