Bedienungsanleitung Sangean U5DBT (Seite 12 von 16) (Englisch)

797386

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

setting. The selected format is used in standby mode

and on the playing mode screen. If the 12 hour clock

format is chosen, the radio will then use the 12 hour

clock with an AM or PM indicator.

Setting the date format

1. Press the Power On / Off button to turn on the radio.

2. Press the Menu button to access FM

the menu for the current mode.

Rotate the Tuning control knob to

select “System” and press the Tuning control knob to

enter the system settings menu.

3. Rotate the Tuning control knob to System

<Time >

select “Time” and press the Tuning

control knob to enter the setting.

4. Rotate the Tuning control knob to Time

select “Set date format” and press

the Tuning control knob to enter the setting.

5. Rotate the Tuning control knob to Set date format*

<DD-MM-YYYY >

Set date format

<MM-DD-YYYY >

select “DD-MM-YYYY” or “MM-DD-

YYYY” date format and press the

Tuning control knob to conrm the

setting.

Automatically updating the clock

Your radio will normally update the clock automatically

using the DAB or FM signal. If no signal is available, then

you need to set the time manually. After a power failure

the radio will then set its clock the next time that you turn

on the radio in DAB or FM mode. Alternatively you may

specify that the time is not automatically updated. In this

case the clock must always be set manually after a power

interruption.

1. With your radio switched on, press the Menu button to

access the menu for the current mode.

2. Rotate the Tuning control knob to FM

select “System” and press the

Tuning control knob to enter the system settings menu.

3. Rotate the Tuning control knob to System

<Time >

select “Time”. Press the Tuning

control knob to enter the time setting menu.

4. Rotate the Tuning control knob to Time

select “Auto update” and press the

Tuning control knob to enter the setting.

5. Rotate the Tuning control knob to

Auto update

Auto update

Auto update

Auto update *

choose an update option from

“Update from Any” “Update from

DAB” “Update from FM” or “No

update” as required. Press the

Tuning control knob to conrm your

choice.

NOTE

If you select “Update from Any”, “Update from DAB”,

“Update from FM” the current time received will be

displayed. If no signal is found you should either position

the radio or its aerial so that a signal can be received, or

revert to manual clock mode.

Setting the clock manually

1. With your radio switched on, press the Menu button to

access the menu for the current mode.

2. Rotate the Tuning control knob to FM

select “System” and press the

Tuning control knob to enter the

system settings menu.

3. Rotate the Tuning control knob to System

<Time >

select “Time”. Press the Tuning

control knob to enter the time setting menu.

4. Rotate the Tuning control knob to

Time

Set Time

2:36 PM

select “Set Time / Date” and press

the Tuning control knob to enter

the setting. The hour digits will

flash on the display. Rotate the

Tuning control knob to set the desired hour.

5. Press the Tuning control knob. The

Time

Set Time

2:36 PM

minute digits will flash on the

display. Rotate the Tuning control

knob to set the desired minute.

NOTE

If the radio has been set to use a 12 hour format,

there will be an option here for setting AM or PM for

the clock time. Rotate the Tuning control knob to

select AM or PM. Press the Tuning control knob to

conrm the setting.

6. If the radio has been set to usea Set date

21-9-2016

Time

Saved

DD-MM-YYYY date format (for

example). The day will ash on the

display.

Rotate the Tuning control knob to

change the day as needed.

7. Press the Tuning control knob. The Set date

21-9-2016

Time

Saved

month will flash on the display.

Rotate the Tuning control knob to

set the current month.

8. Press the Tuning control knob. The Set date

21-9-2016

Time

Saved

year will flash on the display.

Rotate the Tuning control knob to

set the current year. Then press

the Tuning control knob to conrm

the setting. The display will show “Time Saved”.

NOTE

If the radio has been set to use a MM-DD-YYYY date

format, follow the steps above to set the month / day

/ year setting.

Setting the alarm clock

Your radio has two separate alarms which can be set

to wake you to either the radio or a buzzer alarm. In

the event of a power interruption your radio has built in

memory that will retain your alarm settings. Ensure that

the time is set correctly before setting the alarms.

NOTE

When using batteries only and the radio is switched off,

the alarms can’t be set and activated.

NOTE

If no buttons are pressed for 10 seconds, the radio will

exit the alarm setup.

Press and release the Alarm 1 Alarm 1:Setting

Off

button, for example. “Alarm 1:

Setting” will show on the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U5DBT Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U5DBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info