Bedienungsanleitung Satel CA-10 (Seite 19 von 24) (Englisch)

699577

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

CA-10 SATEL

confirmation, if the selected user is to be deleted. If not, press the [

] key, if yes, press

the [#] key. The numbers of users from 10 to 12 can be entered by pressing two keys,

first the key of tens [

], then the key of units (from 0 to 2).

In the LCD keypad, the user indicated by the cursor (flashing field) will be deleted. On

pressing and holding down the ▲ or ▼ key the name of the user indicated with the

cursor appears. The cursor can be positioned with ◄►.

The function is only available to the master user.

Example: deleting the third user’s access code (master code = 1234)

[1234] [

] - activating the „user function” mode by the master user,

[3] - calling the „delete code” function, the zone LEDs indicate the partition

users' numbers.

[3] - selecting the code to delete; the LED of the chosen code starts blinking

[#] - selected user code deletion; four short and one longer beeps signal the end

of the function.

Zone bypass [CODE][

][4]

This function makes it possible to bypass zones in order to partially arm the alarm

system or to bypass malfunctioning detectors. Only disarmed zones can be bypassed.

In the LED keypad, bypassing a zone consists in entering the number of the LED on

which the given zone is indicated. Only the zones belonging to the keypad served

partition can be bypassed. The zones 1-12 can only be bypassed when they are

indicated on the keypad LEDs. The installer decides about which zones should be

indicated. The zones 13-16 can be bypassed by entering the zone number even when

they are not indicated on the LEDs. When the bypass function is in use, the LED

keypad indicates the state of max. 12 zones. With the zones bypassed, the

corresponding LEDs are blinking. Enter the numbers of LEDs / zones from 10 to 16 by

pressing two keys, first the key of tens [

], then the key of units (from 0 to 6). Confirm

the choice by pressing [#]. The zones will remain bypassed until next disarming or until

they are unbypassed.

When the function is active, on entering a zone number, the panel will signal bypassing

the zone with two beeps, and enabling the zone with one beep. Two long beeps mean

that the zone belongs to another partition, or it is armed and its bypassing is not

possible.

In the LCD keypad ▼ key changes the status of the zone (bypassed - unbypassed)

indicated by the cursor. Pressing ▲ key displays the zone name. The cursor can be

positioned with ◄ ► keys. It is possible to choose a zone by giving its number with the

numeric keys of the panel (for example: [

][3] will enable bypassing of zone 13).

The function is available only to the master user and the user with authority level 1.

Example: bypassing zones 3, 5 and 12 (master access code = 1234)

[1234] [

] - activating the „user function” mode by the master user,

[4] - calling the „Zone bypass” function,

[3][5] - selecting zones numbers 3 and 5; the panel will confirm the entry of each

number by with two short beeps,

[

][2] - selecting zone number 12; the panel will confirm the entry with two short

beeps,

[#] - confirmation of the data and quitting of the function programming.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-10 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info