Bedienungsanleitung Satel Integra 64 (Seite 78 von 114) (Englisch)

699075

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

76 Programming SATEL

Disable downloading [Block DWNL] – with this option enabled, starting communication with

the DLOADX program “from pins” will be impossible.

Hide service mode after [Hide SM after] – the time counted from the last operation

performed in the service menu, after expiry of which the service mode menu will be hidden

(see: p. 6). If value 0 is programmed, the automatic hiding of the service mode will be

disabled.

Service mode beep [SM sounds] – with this option enabled, the service mode will be

acoustically signaled in the keypad.

User code min. length [Min. code length] – the minimum required number of digits in the

user code. The parameter will be taken into account when creating and editing the codes

(but it has no effect on the codes already existing in the system).

6.7 Other parameters

Prefix length – the required number of digits in the prefix. Entering a number different from 0

means that from now each code will have to be preceded by a prefix:

– normal – for everyday use. By default, it consists of a suitable number of digits 0 (e.g. if

the prefix length has been set at 4, the default prefix will be: 0000),

– DURESS – to be used, when the user is forced to enter the code. If used, a silent alarm

will be triggered. By default, it consists of a suitable number of digits 4 (e.g. if the prefix

length has been set at 3, the default prefix will be: 444).

The prefixes and their validity can be programmed by the administrator (master), using the

CHANGE PREFIX function.

Each change of the prefix length restores the prefix factory values.

The service code need not be preceded by a suitable prefix – it is enough when the

number of digits preceding the code matches the prefix length.

PING test – the ETHM-1 (firmware version 1.05 or newer) / ETHM-1 Plus modules can test

communications by using the PING command sent to the indicated network device. The

ETHM-1 / ETHM-1 Plus module will be testing communication after the parameters

described below are configured and the PING TEST option is enabled in the module itself.

In the DLOADX program, you can program the PING test parameters in the “Structure”

window, “Hardware” tab, after you click on the keypad bus.

Address to test [PING] – address of the device to which the module is to send the PING

command to test communications. It can be entered as an IP address (4 decimal

numbers separated by dots) or as a name.

Period [PING period] – the interval between consecutive communication tests by using the

PING command. If value 0 is programmed, the communication test will be disabled.

Tries no. before trouble [PING tries] – the number of unsuccessful communication tests

(the module has received no answer to the PING command sent) after which trouble will

be reported. If value 0 is programmed, the communication test will be disabled.

Integration encryption key [Integrate key] – if the ETHM-1 / ETHM-1 Plus module is used

for integration of the control panel with other systems and the communication over

Ethernet network is to be encrypted, enter the key with which the data will be encrypted:

up to 12 alphanumeric characters. In the DLOADX program, the encryption key can be

programmed in the “Structure” window, “Hardware” tab, after clicking on the keypad bus.

6.8 Default user's authority level

You can define which user rights will be automatically assigned to a new user. The list of

permissions can be modified during user creating or editing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 64 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info