Bedienungsanleitung Satel MICRA (Seite 21 von 52) (Englisch)

699548

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

SATEL MICRA 19

7. O

(

TIME

) – violation of the zone will activate the output 1 for a preset cut-off

time, if the output is of the C

ONTROLLED

type.

8. O

(

TIME

) – violation of the zone will activate the output 2 for a preset cut-off

time, if the output is of the C

ONTROLLED

type.

9. O

UTPUT OFF

1 – violation of the zone will deactivate the output 1, if the output is of the

ONTROLLED

type.

10. O

UTPUT OFF

2 – violation of the zone will deactivate the output 2, if the output is of

the C

ONTROLLED

type.

11. 24

H FIRE

– permanently armed zone, dedicated to handling the fire detectors.

12. 24

H SILENT

– permanently armed zone, but the alarm from the zone will not trigger

the loud signaling. Intended to handle e.g. the flood detector.

L threshold – the lower voltage threshold for analog zone. If the voltage drops below the

defined value (minus tolerance), the module will register zone violation. Entering value 0

means that the voltage threshold is not controlled.

H threshold – the upper voltage threshold for analog zone. If the voltage rises above the

defined value (plus tolerance), the module will register zone violation. Entering value 0

means that the voltage threshold is not controlled. The maximum value that can be

programmed is 16.56 V.

Tolerance – the voltage value to be subtracted from the defined value at threshold L when

the voltage drops below threshold L or added to the defined value at threshold H when

the voltage rises above threshold H so that the module can register exceeding the

programmed value / the voltage value to be added to the defined value at threshold L

when the voltage rises above threshold L or subtracted from the defined value at

threshold H when the voltage drops below threshold H so that the module can register

zone restore. The field is available to analog zones.

Output 1 / 2 – fields available for the communication device mode. They allow you to

define, if and how the zone will control the output. Click on the field twice to display

successively:

– blank field – zone does not control the output,

– ON – violation of the zone or exceeding the voltage value at threshold L or H, as

defined for the zone, will activate the output,

– ON for a time – violation of the zone or exceeding the voltage value at threshold L or

H, as defined for the zone, will activate the output for a defined time (cut-off time

must be defined for the output),

– OFF – violation of the zone or exceeding the voltage value at threshold L or H will

deactivate the output.

Wireless zones

Name – individual name of a wireless zone (up to 16 characters).

Type – information on the type of wireless device:

0: no;

1: MMD-300 (magnetic contact);

2: MPD-300 (PIR);

3: MSD-300 (smoke and heat detector);

5: MFD-300 (flood detector);

6: MMD-302 (roller);

7: MGD-300 (glass-break detector).

Serial number – displayed in the field is the detector serial number.

After the detector is added to the system and its serial number is displayed in the

corresponding field, it is advisable to check it with the detector serial number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel MICRA Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel MICRA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info