Bedienungsanleitung Scan DSA 12 (Seite 15 von 20) (Englisch)

745587

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

INSTRUCTIONS FOR HEATING

Environmentally-Friendly Heating

Avoid restricting your wood-burning stove to an extent where no

flames are visible during the degasifying period, as this leads to par-

ticularly inefficient heating. The gases released by the wood do not

burn due to the low temperature in the combustion chamber. Part

of the gas condenses in the wood-burning stove and flue system as

soot, and this could lead to your chimney catching fire. The smoke

that exits the chimney is bad for the environment and has an unple-

asant smell.

Lighting

We recommend the use of fire starters, or similar products, which are

available from your Scan dealer. Using fire starters helps to light the

wood quicker, and keeps the burning process clean.

Never use liquid lighting fuels!

„Top down“ lighting

"Top down" lighting gives a more environmentally friendly start to

your fire and helps to keep the glass area as clean as possible.

3 pieces of wood approx. 35 - 45 cm long with a weight of approx. 1

kg per piece.

1 piece of wood approx. 30 - 35 cm long with a weight of about 0.5 kg.

15 - 25 thin sticks of about 20 cm with a total weight of approx. 500 g.

3 fire starters.

Position the large logs in the centre of the combustion chamber 1-2

cm apart as shown. Put half the kindling sticks across the logs in

a criss-cross fashion. Place the smallest log on top of the sticks as

shown and arrange the last sticks in front of the log. Position the

firestarters between the sticks and light.

Set the primary and secondary air controls to maximum in the

lighting phase. If the fire is too strong, you may throttle down the

primary air damper (at the left).

Continuous firing

It is important to reach as high a temperature as possible in the

combustion chamber. This makes the most efficient use of the wood

stove and fuel, and ensures a clean burning process. At the same

time, this avoids soot build-up on the combustion chamber walls and

glass. While the stove is lit, you should not see any smoke, but just air

movement that indicates the burning process.

After completing the lighting phase, you should have a good layer of

embers in the wood stove; you can then start stoking up the stove.

Lay 2-3 pieces of wood, of about 1 kg weight with a length of about

35 - 45 cm onto the fire.

Note! The wood must catch fire quickly; this is why we recommend

setting the primary airflow to full power. Running the stove at too

low a temperature and with too little primary air can lead to defla-

gration of the gases, and thus cause damage to the stove.

When stoking up with wood, always open the glass door carefully

to avoid smoke escaping. Stoke up with wood while the fire is still

burning nicely.

Using your stove in the spring or autumn

Occasional lighting of the stove using the „top down“ lighting met-

hod (see above) is recommended in changeable weather such as in

spring/autumn when your heating requirements are not as great.

Why you need a chimney

The chimney is the wood-burning stove‘s motor; it‘s performance

decides how well your stove will work. The draft in the chimney

creates a vacuum in the wood-burning stove. The vacuum draws the

smoke out of the stove, and takes in air through the combustion air

baffle to fuel the burning process. Combustion air is also used for the

airwash system that keeps the window clear of soot.

NAVN:

STI:

DIMENSION:

MATERIALE:

DATO:

SIGN:

Krog Iversen & Co A/S

TG.NR:

EMNE:

I:\Udvikling\TEGNING\DSA 12\90085010.idw

90085010

Optænding

26-01-10

Scan DSA 12

VÆGT:

AREAL:

N/A

NAVN:

STI:

DIMENSION:

MATERIALE:

DATO:

SIGN:

Krog Iversen & Co A/S

TG.NR:

EMNE:

I:\Udvikling\TEGNING\DSA 12\90085010.idw

90085010

Optænding

26-01-10

Scan DSA 12

VÆGT:

AREAL:

N/A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scan DSA 12 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scan DSA 12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info