Bedienungsanleitung Scheppach BHT560-40Li (Seite 18 von 76) (Deutsch, Englisch, Französisch, Polnisch)

782038

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 | GB

• Disconnect the plug from the power source

and/or the battery pack from the power too

before making any adjust -ments, changing

accessories, or storing power tools. Such pre-

ventive safety measures reduce the risk of starting

the power tool accidentaIly.

• Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

• Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less Iikely to bind and are easier to control.

• Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

Careful handling and use of battery devices

• Charge the batteries only in chargers that are

recommended by the manufacturer. Risk of re

if a charger that is suitable for a specic type of

battery is used with other batteries

• In the power tools, use only the batteries de-

signed for the purpose. The use of other batteries

may result in injuries and risk of re

• Keep the unused battery away from paper clips,

coins, keys, nails, screws and other small metal

objects, which could cause bridging of the con-

tacts. A short circuit between the battery contacts

may cause burns or re

• If used incorrectly, liquid may leak from the

battery. Avoid contact with this. In the event of

accidental contact, rinse off with water. If the

liquid gets into eyes, seek medical assistance.

Leaking battery uid may cause skin irritations or

burns

Service

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• If you work with an electric tool outdoors, on-

ly use extension cables that are also suitable

for outdoor use. Using an extension cable suit-

able for outdoor use reduces the risk of an elec-

tric shock.

• If you cannot avoid using the electrical tool in

a wet environment, use a fault-current circuit

breaker. Using a fault-current circuit breaker re-

duces the risk of an electric shock.

Personal safety

• Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or medi-

cation. A moment of inattention white operating

power tools may result in serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

• Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your nger on the switch or energising power tools

that have the switch on invites accidents.

• Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of

the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

• If dust extraction and collection devices can be

mounted, make sure that they are connected

and used properly. Using a dust extraction unit

can reduce hazards caused by dust.

Power tool use and care

• Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must

be repaired.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BHT560-40Li Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info