Bedienungsanleitung Scheppach BHT560-40Li (Seite 20 von 76) (Deutsch, Englisch, Französisch, Polnisch)

782038

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 | GB

3. Push the locking switch (6) forwards and activate

the on/off switch (7).

4. As soon as the tool is running, you can release

the locking switch (6).

Power off:

5. Release the safety switch (4) or on/off switch (7).

Working with the tool

During the cutting process, be careful not to touch any

objects such as wire fences or plant supports. This can

cause damage to the safety cutter bar.

• If the blade is jammed by a xed object, immediately

turn off the tool and remove the battery. Then remove

the object.

• Avoid over-stressing the device whilst working.

m ATTENTION!

If the cutting unit touches a foreign object, the operat-

ing noises get louder or the hedge trimmer vibrates

unusually excessively, stop the motor and allow the

hedge trimmer to come to a standstill. Remove the re-

chargeable battery and take the following measures:

• Check for damage

• Check for loose parts and secure all loose parts

• Replace damaged parts with similar parts or have

them repaired.

Settings on the hedge trimmer

Adjusting the rear handle (15)

The rear handle can be adjusted in 3 working positions

in order to guide the hedge trimmer easier.

While adjusting, the throttle (14) cannot be actuated.

1. Use the left hand to hold the hedge trimmer tight by

the front handle (3).

2. Press the button (13) and turn the handle into the

required position. (Fig. 03)

3. Release the button (13). Ensure that

4. the unlocking device re-engages and the handle is

afxed securely.

Cutting techniques

• Cut out thick branches with loppers before using the

hedge trimmer.

• The double-sided safety cutter bar enables cutting

in both directions or from one side to the other using

a pendulum movement.

• When cutting vertically, evenly move the hedge trim-

mer forwards or up and down in an arching move-

ment.

• When cutting horizontally, move the battery-powered

hedge trimmer in a sickle shape from the edge of the

hedge so that cut off branches can fall to the ground.

• In order to cut long straight lines, we recommend

setting up a string line.

• Have the equipment checked if necessary.

• Switch off the equipment when not in use.

• Wear gloves

7. Before starting the equipment

Unpack the device and check it for complete delivery

contents and transport damage.

NOTE

The batteries (optional; depending on the delivery

scope) are not fully charged on delivery. Before rst

use, fully charge the batteries. See charger instruc-

tion manual.

Removing / inserting the battery(Fig. 2)

1. To remove the battery (9) from the appliance,

press the release button (11) on the battery and

pull out the battery.

2. To insert the battery (9), place it on the guide

track and push it back into the appliance. It will

audibly snap in.

8. Operation

Wear appropriate clothing and safety gloves when

working with this tool. Wear eye and hearing protec-

tion. Before each use, ensure that the unit is work-

ing properly.

The on/off switch and the safety switch must not be

locked. When the switch is released, the motor must

turn off. If a switch is damaged, the tool must not be

used. Personal Protective Equipment and a properly

functioning device will lower the risk of injuries and

accidents.

Comply with noise protection and local stipulations.

m ATTENTION!

Do not use the hedge trimmer with a faulty or

heavily worn cutting unit.

Removing the blade guard:

1. Before turning on the device, remove the blade

guard (10) from the cutter bar (2).

Turning the device on and off

Find safe footing and hold the tool securely with both

hands and at a distance from your body. Before turn-

ing on the unit, make sure that the blades are not

touching anything. Ensure that the hedge trimmer

is properly in the prescribed working position before

starting the motor.

Power on:

1. Ensure that the battery (9) has been inserted (see

“Removing/inserting the battery”).

2. Press the safety switch (4) on the front handle (5).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BHT560-40Li Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info