Bedienungsanleitung Scheppach BS2000 Primaster (Seite 22 von 46) (Deutsch, Englisch, Französisch)

782174

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

22 GB

1. Introduction

Manufacturer:

Woodster GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating

the machine and carefully follow its information. The

machine can only be operated by persons who were

instructed concerning the operation of the machine

and who are informed about the associated dangers.

The minimum age requirement must be complied

with. In addition to the safety requirements in these

operating instructions and your country’s applicable

regulations, you should observe the generally rec-

ognized technical rules concerning the operation of

woodworking machines.

We cannot accept any liability for damage or acci-

dents which arise due to a failure to follow these in-

structions and the safety instructions.

2. Device description (Fig. 1-16)

1 Case door

2 Door lock

3 Saw blade safety device

4 Saw blade guidance

5 Longitudinal limit stop

6 Tabletop

7 Frame

8 On/Off switch

9 Handle for saw blade tensioning

10 Adjustment handle for upper blade wheel

11 Motor

12 Suction connector

13 Adjustment handle for saw blade safety device

14 Table insert

3. Scope of delivery

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

Attention! The device and packaging materials are

not toys! Children must not be allowed to play with

plastic bags, lm and small parts! There is a risk of

swallowing and suffocation!

• Bandsaw

• Saw table

• Push stick

• Longitudinal limit stop

• Fastening materials

• Allen key SW 10/ 13

• Allen key SW 3/ SW4

• Original operating instructions

4. Intended use

The bandsaw is designed to perform longitudinal and

cross cuts on timber or wood-type materials. To cut

round materials you must use suitable holding

devices.

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufac-

turer will be liable for any damage or injuries of any

kind caused as a result of this.

The machine is to be operated only with suitable

saw blades. To use the machine properly you must

also o serve the safety regulations, the assembly in-

structions and the operating instructions to be found

in this manual.

All persons who use and service the machine have

to be acquainted with this manual and must be in-

formed about the machine’s potential hazards.

It is also imperative to observe the accident preven-

tion

regulations in force in your area. The same applies

for the general rules of occupational health and safe-

ty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BS2000 Primaster Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info