Bedienungsanleitung Scheppach BS3000 Primaster (Seite 21 von 44) (Deutsch, Englisch, Französisch)

782175

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

21GB

4. Intended use

The bandsaw is designed to perform longitudinal and

cross cuts on timber or wood-type materials. To cut

round materials you must use suitable holding

devices.

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufac-

turer will be liable for any damage or injuries of any

kind caused as a result of this.

The machine is to be operated only with suitable

saw blades. To use the machine properly you must

also o serve the safety regulations, the assembly in-

structions and the operating instructions to be found

in this manual.

All persons who use and service the machine have

to be acquainted with this manual and must be in-

formed about the machine’s potential hazards.

It is also imperative to observe the accident preven-

tion

regulations in force in your area. The same applies

for the general rules of occupational health and safe-

ty.

The manufacturer shall not be liable for any changes

made to the machine nor for any damage resulting

from such changes.

Even when the machine is used as prescribed it is

still impossible to eliminate certain residual risk fac-

tors. The following hazards may arise in connection

with the machine’s construction and design:

• Damage to hearing if ear-muffs are not used as

necessary.

• Harmful emissions of wood dust when used in

closed rooms.

• Contact with the blade in the uncovered cutting

zone.

• Injuries (cuts) when changing the blade.

• Injury from catapulted workpieces or parts of work-

pieces.

• Crushed ngers.

• Kickback.

• Tilting of the workpiece due to inadequate support.

• Touching the blade.

• Catapulting of pieces of timber and workpieces.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial ap-

plications. Our warranty will be voided if the machine

is used in commercial, trade or industrial businesses

or for equivalent purposes.

5. General safety information

Attention! The following basic safety measures must

be observed when using electric tools for protection

against electric shock, and the risk of injury and re.

Read all these notices before using the electric tool

and keep the safety instructions for later reference.

Safe work

1 Keep the work area orderly

–Disorder in the work area can lead to accidents.

2 Take environmental inuences into account

–Do not expose electric tools to rain.

–Do not use electric tools in a damp or wet envi-

ronment.

–Make sure that the work area is well-illuminated.

–Do not use electric tools where there is a risk of

re or explosion.

3 Protect yourself from electric shock

–Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4 Keep children away

–Do not allow other persons to touch the equipment

or cable, keep them away from your work area.

5 Securely store unused electric tools

–Unused electric tools should be stored in a dry,

elevated or closed location out of the reach of

children.

6 Do not overload your electric tool

–They work better and more safely in the specied

output range.

7 Use the correct electric tool

–Do not use low-output electric tools for heavy

work.

–Do not use the electric tool for purposes for which

it is not intended. For example, do not use hand-

held circular saws for the cutting of branches or

logs.

–Do not use the electric tool to cut rewood.

8 Wear suitable clothing

–Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

–When working outdoors, anti-slip footwear is rec-

ommended.

–Tie long hair back in a hair net.

9 Use protective equipment

–Wear protective goggles.

–Wear a mask when carrying out dust-creating

work.

10 Connect the dust extraction device if you will be

processing wood, materials similar to wood, or

plastics.

–If connections for dust extraction and a collect-

ing device are present, make sure that they are

connected and used properly.

–When processing wood, materials similar to

wood, and plastics. operation in enclosed spaces

is only permitted with the use of a suitable extrac-

tion system.

11 Secure the workpiece

–Use the clamping devices or a vice to hold the

workpiece in place. In this manner, it is held more

securely than with your hand.

–An additional support is necessary for long work-

pieces (table, trestle, etc.) in order to prevent the

machine from tipping over.

–Always press the workpiece rmly against the

working plate and stop in order to prevent bounc-

ing and twisting of the workpiece.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BS3000 Primaster Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info