Bedienungsanleitung Scheppach DC500 (Seite 19 von 76) (Deutsch, Englisch, Dänisch, Schwedisch, Finnisch)

781453

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

www.scheppach.com GB | 19

In addition to the safety instructions in this operating

manual and the separate regulations of your country,

the generally recognised technical rules relating to the

operation of such machines must also be observed.

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

2. Device description

1. Retaining rod

2. Filter bag

3. Housing cpl. with engine

4. On/o󰀨 switch

5a. Side panel right

5b. Side panel left

6. Extraction hose

7. Wheel

8. Hose coupling

9. Floor plate

10. Dust bag

11. Clamp tting

12. Adapter set

13. Intermediate plate

14. Hose clamp

15. Washer

16. Split pin

17. Fillister head screw M5x16

18. Fillister head screw M5x30

19. Hexagonal nut M5

3. Scope of delivery

• Housing cpl. with engine

• Floor plate

• Side panel right

• Side panel left

• Intermediate plate

• Extraction hose

• Filter bag

• Dust bag

• Retaining rod

• Clamp tting

• Wheel (2x)

• Hose coupling

• Adapter set (4-piece)

• Hose clamp (2x)

• Washer (2x)

• Split pin (2x)

• Fillister head screw M5x16 (12x)

• Fillister head screw M5x30 (4x)

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer

We hope your new tool brings you much enjoyment and

success.

Note:

In accordance with the applicable product liability laws,

the manufacturer of this device assumes no liability for

damage to the device or caused by the device arising

from:

• Improper handling,

• Failure to comply with the operating instructions

• Repairs carried out by third parties, unauthorised

specialists.

• Installing and replacing non-original spare parts

• Application other than specied

• Failure of the electrical system in the event of the

electrical regulations and VDE provisions 0100, DIN

13 / VDE0113 not being observed

Please consider:

Read through the complete text in the operating manu-

al before installing and commissioning the device.

The operating manual is intended to help the user to

become familiar with the machine and take advantage

of its application possibilities in accordance with the

recommendations.

The operating manual includes important instructions

for safe, proper and economic operation of the device,

for avoiding danger, for minimising repair costs and

downtimes, and for increasing the reliability and ex-

tending the service life of the device.

In addition to the safety instructions in this operating

manual, you must also observe the regulations appli-

cable to the operation of the device in your country.

Keep the operating manual package with the machine

at all times and store it in a plastic cover to protect it

from dirt and moisture. They must be read and careful-

ly observed by all operating personnel before starting

the work.

The device may only be used by personnel who have

been trained to use it and who have been instructed

with respect to the associated hazards. The required

minimum age must be observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DC500 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info