Bedienungsanleitung Scheppach DC500 (Seite 20 von 76) (Deutsch, Englisch, Dänisch, Schwedisch, Finnisch)

781453

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

www.scheppach.com

20 | GB

• The machine may only be used, maintained or re-

paired by persons who are familiar with it and have

been informed of the dangers. Any liability of the

manufacturer for damages resulting from arbitrary

changes to the machine is excluded.

• The machine may only be operated with original ac-

cessories from the manufacturer.

5. Safety information

m Attention! The following basic safety measures

must be observed when using power tools for pro-

tection against electric shock, and the risk of injury

and re. Read all these notices before using the pow-

er tool and store the safety instructions well for later

reference.

Safe work

• Warning: When power tools are used, basic safety

precautions must be followed to eliminate the risks

of re, electric shock and injury to persons.

• Follow all these instructions before and while work-

ing with the machine.

• Store these safety instructions safely.

• Protect yourself from electric shock! Avoid physical

contact with earthed parts.

• Unused devices should be stored in a dry, locked

place and out of reach of children.

• Keep tools sharp and clean in order to be able to

work better and more safely.

• Check the cable of the tool regularly and have it re-

placed by a recognised specialist when damaged.

• Check extension cable cables regularly and replace

them when damaged.

• Only use extension cables that have been approved

and appropriately labelled for use outdoors.

• Pay attention to what you are doing. Remain sen-

sible when working. Do not use the tool when you

are fatigued.

• Do not use any tools on which the switch cannot be

switched on and o󰀨.

• Warning! The use of other insertion tools and other

accessories can entail a danger of injury.

• Pull out the mains plug for any adjustment or repair

tasks.

• Pass the safety instructions on to all persons who

work on the machine.

• Before commissioning, check that the voltage on the

device type plate corresponds to the mains voltage.

• Hexagonal nut M5 (4x)

• Operating manual

4. Proper use

The machine complies with the applicable EC ma-

chinery directive.

• The machine has been built according to the state-

of-the-art and the technical safety requirements.

Nevertheless, its use may cause danger to the life

and limb of the user or third parties, or damage to

the machine and other material assets.

• Only use the machine when in a technically faultless

condition, appropriately and in compliance with the

operating manual and with full knowledge of safety

and hazards! In particular, rectify malfunctions that

could impair safety immediately (or commission rec-

tication works accordingly)!

• The suction system is used for extracting chips

which are produced when working with wood or

wood-like materials.

• Please observe that our equipment was not de-

signed with the intention of use for commercial or

industrial purposes. We assume no guarantee if the

equipment is used in commercial or industrial appli-

cations, or for equivalent work.

• Check the lter regularly for damage. Replace dam-

aged lters! Regularly check the housing seal and

the seals for the lter and dust bag.

• When using the cleaning nozzles, do not suck up

any foreign bodies such as screws, nails, pieces of

plastic or wood.

• The machine may only be operated with original

parts and original accessories from the manufac-

turer.

• The suction of wood dust and wood chippings in

commercial areas is not permitted.

• Only suitable for collecting chips (not dust).

• Any use beyond this is improper use. The manufac-

turer is not responsible for the resulting damages;

the user solely bears the risk.

• The safety, operating and maintenance specica-

tions of the manufacturer, as well as the dimensions

specied in the technical data, must be observed.

• Relevant accident prevention regulations and oth-

er generally recognized safety and technical rules

must also be observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DC500 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info