Bedienungsanleitung Scheppach DC500 (Seite 21 von 76) (Deutsch, Englisch, Dänisch, Schwedisch, Finnisch)

781453

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

www.scheppach.com GB | 21

• Check whether the moving parts function faultlessly

and do not jam or whether parts are damaged. All

parts must be correctly mounted and all conditions

must be fullled to ensure fault-free operation of the

tool.

• Damaged protective devices and parts must be

repaired properly or replaced by a recognised spe-

cialist workshop unless otherwise specied in the

usage instructions.

• Have damaged switches replaced by a customer

service workshop.

• This tool conforms to the applicable safety regula-

tions. Repairs may only be performed by an elec-

trician using original spare parts. Otherwise, acci-

dents can occur.

• If necessary, wear suitable personal protective

equipment. This could include:

- Hearing protection to avoid the risk of becoming

hearing impaired;

- Respiratory protection to avoid the risk of inhaling

harmful dust.

• The operator must be informed about the conditions

that inuence the noise generation.

• Errors in the machine must be reported to the per-

son responsible for safety as soon as they are dis-

covered.

• This device is not designed to collect dangerous

dust.

• This device is not designed to be operated by per-

sons (including children) with impaired physical,

sensory or mental capabilities, or who have insuf-

cient experience and/or insu󰀩cient knowledge

unless they are being supervised by a person who

is responsible for their safety or they are receiving

instruction about how this device is to be used. Chil-

dren should not be left unattended, to ensure they do

not play with the device.

• WARNING: Operators must be adequately instruct-

ed in the use of these machines.

• WARNING: This machine is not suitable for picking

up dust that is hazardous to health.

• WARNING: This machine is intended for dry use

only.

• WARNING: This machine is intended for indoor use

only.

• WARNING: This machine may only be stored in-

doors.

• WARNING: Do not allow the mains connection cable

to come into contact with the rotating brushes.

• If an extension cable is required, make sure that its

cross-section is su󰀩cient for the current consump-

tion of the device. Minimum cross-section 1.5 mm2.

• Only use the cable drum when unrolled.

• Check the mains connection cable. Never use any

faulty or damaged connection cables.

• Do not use the cable to pull the plug out of the outlet.

Protect the cable from heat, oil and sharp edges.

• Do not expose the machine to rain and do not use

the machine in a damp or wet environment.

• Ensure good lighting.

• Do not use in the vicinity of combustible uids or

gases.

• When working outdoors, anti-slip footwear is rec-

ommended. Tie long hair back in a hair net. Avoid

abnormal posture

• The operating person must be at least 18 years of

age; trainees must be at least 16 years, however

only under supervision.

• Keep children away from the device when connect-

ed to the mains.

• Keep the workplace free of wood debris and parts

lying around.

• Disorder in the work area can lead to accidents.

• Do not allow other persons, especially children, to

touch the tool or the mains cable. Keep such per-

sons away from the workplace.

• Personnel working on the machine must not be dis-

tracted.

• Only carry out modications, adjustment, measuring

and cleaning work when the engine is switched o󰀨.

- Pull out the mains plug -

• Before switching on, make sure that keys and adjust-

ing tools are removed.

• Switch o󰀨 the motor and pull out the mains plug

when leaving the work station.

• All protection and safety equipment must be reas-

sembled immediately after repair or maintenance

work is completed.

• The safety, operating and maintenance information

of the manufacturer, as well as the dimensions spec-

ied in the technical data, must be observed.

• The applicable accident prevention regulations and

the other generally accepted safety rules must be

observed.

• Do not use low-output machines for heavy work.

• Do not use the cable for purposes for which it is not

intended!

• Make sure that you have secure footing and always

maintain your balance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DC500 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info