Bedienungsanleitung Scheppach DECO-XLS (Seite 28 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

781462

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

www.scheppach.com

28 | GB

• It is imperative to make sure that all devices which

cover the saw blade are in good working order.

• Never dismantle the machine’s safety devices or

render them inoperative.

• Damaged or faulty safety devices have to be re-

placed immediately.

• Never cut workpieces which are too small to hold

securely in your hand.

• Never load the machine so much that it cuts out.

• Always press the workpiece rmly against the saw

table.

• Never remove loose splinters, chips or jammed piec-

es of wood when the saw blade is running.

• Switch the machine o󰀨 to rectify faults at the blocked

plug-in tool. - Pull the power plug- Remove the

blockage. Important! Risk of injury from saw blade!

Wear gloves. Carry out a trial run without a work-

piece. Ensure that no unusual noise or vibration oc-

curs. Should this be the case, switch the unit o󰀨 and

contact the manufacturer.

• Carry out retooling work, adjustments, measure-

ments and cleaning jobs only when the motor is

switched o󰀨. - Pull the power plug. -

• Before switching on, make sure that all keys and

wrenches have been removed from the tool.

• Switch o󰀨 the motor and pull the power plug before

you leave the workplace.

• Electrical installation work, repairs and maintenance

may only be carried out by persons who have been

specially trained.

• Ret all guards and safety devices immediately af-

ter you have completed any repairs or maintenance

work.

• Be sure to observe the safety information and op-

erating and maintenance instructions issued by the

manufacturer, as well as the dimensions listed in the

Technical Data.

• It is imperative to observe the accident prevention

regulations in force in your area as well as all other

generally recognized rules of safety.

• Note the information published by your professional

associations (VBG 7).

• The saw is intended to be used indoors only.

• Workpieces that are smaller than the saw blade

guard can cause injuries to the hands or ngers.

Use suitable aids!

• Avoid cramped hand positions when guiding in the

workpiece and avoid positions in which slipping

could lead to your hand making direct contact with

the saw blade.

-Damaged switches have to be replaced by a

customer service workshop.

-Do not use any electric tool on which the

switch cannot be switched on and o󰀨.

21. ATTENTION

-The use of other insertion tools and other ac-

cessories can entail a danger of injury.

22. Have your electric tool repaired by a quali-

ed electrician

-This electric tool conforms to the applicable

safety regulations. Repairs may only be per-

formed by an electrician using original spare

parts. Otherwise accidents can occur.

WARNING

This electric tool generates an electromagnetic eld

during operation. This eld can impair active or passive

medical implants under certain conditions. In order to

prevent the risk of serious or deadly injuries, we recom-

mend that persons with medical implants consult with

their physician and the manufacturer of the medical im-

plant prior to operating the electric tool.

5.2 Additional safety instructions

• Switch the machine o󰀨 immediately and pull the

power plug in an emergency.

• Follow all these safety instructions before and while

working with the saw.

• Do not use this saw to cut re wood.

• Do not use this saw to cross-cut roundwood without

a suitable holding device.

• The machine is equipped with a safety switch to

prevent it from being switched on again accidentally

after a power failure.

• If you need to use an extension cable, make sure

its conductor cross-section is big enough for the

saw’s power consumption. Minimum cross-section

1,5 mm2.

• If you use a cable reel, the complete cable must be

pulled o󰀨 the reel.

• Persons working on the machine should not be dis-

tracted.

• After you have switched o󰀨 the motor, never slow

down the saw blade by applying pressure to its side.

• Only t blades which are well sharpened and have

no cracks or deformations.

• Faulty saw blades must be replaced immediately.

• Never use saw blades which do not comply with the

data specied in this manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DECO-XLS Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info