Bedienungsanleitung Scheppach DECO-XLS (Seite 29 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

781462

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

www.scheppach.com GB | 29

Length of saw blade

approx.

132 mm

Reach 406 mm

Max. cutting height

at 0°

50 mm

Max. cutting height

at 45°

22 mm

Weight 13.3 kg

*Operating mode S1:

Continuous operation at constant load

**Operating mode S6 30%:

Continuous operation with idling (cycle time 10 min-

utes). To ensure that the motor does not become ex-

cessively hot, it may only be operated for 30% of the

cycle at the specied rating and must then be allowed

to idle for 70% of the cycle.

Noise emission values

Sound

Sound values were measured in accordance with EN

61029.

Wear ear-mu󰀨s.

The impact of noise can cause damage to hearing.

Sound pressure level LpA 66,9 dB(A)

Uncertainty KpA 3 dB(A)

Sound power level LWA 79,9 dB(A)

Uncertainty KWA 3 dB(A)

The quoted values are emission values and not nec-

essarily reliable workplace values. Although there is a

correlation between emission and imission levels it is

impossible to draw any certain conclusions as to the

need for additional precautions.

Factors with a potential inuence on the actual immis-

sion level at the workplace include the duration of im-

pact, the type of room, and other sources of noise etc.,

e. g. the number of machines and other neighbouring

operations.

Reliable workplace values may also vary from coun-

try to country. With this information the user should at

least be able to make a better assessment of the dan-

gers and risks involved.

Limit the noise level to a minimum!

• Use only equipment that is in perfect condition.

• Maintain and clean the equipment regularly.

• Always t the saw blade with the teeth facing in the

direction of the sawing table.

• Always set the correct blade tension to prevent the

saw blades from jerking.

• Be especially careful when cutting material with ir-

regular cut proles.

• Exercise particular caution when cutting round ob-

jects such as rods and pipes. These can roll down

into the saw blade and cause the teeth to catch. Use

a wedge to brace such workpieces.

• The teeth can become caught in the kerf when the

workpiece is pulled back, especially if sawings have

lled in (blocked) the kerf. In this case, you should

switch the saw o󰀨, pull the power plug, clear the kerf

with a wedge, and remove the workpiece.

• Never leave the work area without having already

switched the saw o󰀨. Wait until the saw stops moving

completely.

• Do not position, join, or construct any parts on the

work table while the saw is running.

• Only switch the saw on after you have removed any

remaining material and tools from the work table.

Leave only the workpiece to be machined and any

aids (e.g. wedges) on the work table.

• Always wear safety goggles!

• Keep your ngers at a safe distance from the saw

blade.

• Carefully guide the workpiece and keep it steady at

all times.

• Never leave the work area without having already

switched the saw o󰀨.

• Do not let your familiarity with the saw allow you to

be careless. Carelessness can lead to severe inju-

ries within a fraction of a second.

• Working position is always laterally of the saw blade.

Do not lose this safety information.

6. Technical data

Mains voltage 220-240 V~/50 Hz

Power input 80 Watt (S1*)

120 Watt (S6 30%**)

Stroke rate 500-1700 min-1

Stroke 12 mm

Base area 630 x 295 mm

Tilting range of table from 0° to 45° to the left

Table size 415 x 255 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DECO-XLS Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info