Bedienungsanleitung Scheppach GS55 (Seite 20 von 60) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

781395

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 | GB

• Clean the ventilation slits regularly; keep to the

maintenance instructions.

• Do not overload your device. Work only within the

indicated range of performance. Do not employ any

low power machines for heavy work. Do not use

your device for purposes for which it has not been

designed.

• Only switch the shredder off once the funnel feeder

is completely empty since the shredder may oth-

erwise clog up and not be able to start afterwards.

• Do not attempt to repair the shredder yourself un-

less you are qualied to do so. Any work not spec-

ied in this manual may only be carried out by our

service centre.

Electrical safety

Caution!

The following states how to avoid accidents and inju-

ries due to electric shock:

• Use the tension relief provided for the xing of the

extension cord.

• Damaged cables, coupling and plugs or connecting

leads not corresponding to specications, must not

be employed. Remove the plug immediately from

the plug socket in case of damage to the mains

cable. Do not touch the mains power supply cable

under any circumstances until you have pulled the

plug out of the mains socket.

• If the power cable for this equipment is damaged, it

must be replaced by the manufacturer, a customer

service agent of the same or a similarly qualied

person in order to prevent hazards.

• Do not use the appliance if the on/off switch does

not work properly. Always have a damaged switch

repaired by our Service Centre.

• Only use extension cables that have been approved

for outdoor use and are resistant to splash water.

The core diameter for extension cables measuring

up to 25 m must be at least 2.5 mm², and 2.5 mm²

for cables longer than 25m. Always roll the whole

cable off the reel before use. Check the cable for

damage.

• Do not unplug the shredder by the cable. Keep the

cable away from heat, oil and sharp edges

Warning!

This electric tool generates an electromagnetic eld

during operation. This eld can impair active or pas-

sive medical implants under certain conditions. In or-

der to prevent the risk of serious or deadly injuries,

we recommend that persons with medical implants

consult with their physician and the manufacturer of

the medical implant prior to operating the electric tool.

• Make sure that the material inserted into the shred-

der does not contain hard objects made of metal,

stone, glass or similar.

• Do not use the shredder in the rain and in bad

weather. Work in daylight or under good lighting

conditions.

• Do not operate the shredder when you are tired or

distracted, or under the inuence of alcohol or med-

ication. Always take a break when you need one.

• Switch the shredder off and pull the plug under the

following circumstances:

- when you are not using the device,

- transporting it or leaving it unattended;

- before releasing a jammed blade.

- when you are checking the device, cleaning it or

removing blockages;

- when you are carrying out cleaning or mainte-

nance work or replacing accessories;

- Before moving or lifting the shredder

- If foreign objects should enter the shredder, if

the shredder is making unfamiliar noises or vi-

brations (check the shredder for damage before

starting it up again)

• Do not allow shredded material to accumulate near

the ejection area. This may otherwise hinder prop-

er ejection and force the material back up through

the feeder.

• Do not transport or tip the shredder with the motor

running.

• Keep hands, other body parts and clothing out of

the lling chamber and ejection channel and away

from other moving parts.

• In the event of blockages in the machine intake or

ejection, switch off the motor and disconnect the

machine from the mains before removing leftover

material in the intake opening or ejection channel.

Ensure that the motor is free of rubbish and other

accumulations in order to safeguard the motor from

damage or possible re. Remember that the cutting

tool is also activated when the starting mechanism

is started on a motor operated machine.

• If foreign objects get into the cutting tool or if the

machine makes unusual noises or vibrates in an

unusual way, switch off the motor immediately and

allow the machine to come to rest. Perform the fol-

lowing steps:

- Check the machine for damage.

- Check that all parts are seated securely and

retighten them, if necessary.

- Have any parts replaced or repaired; the parts

must be of similar quality.

• Make sure that all covers and shields are in place

and in good working condition.

Caution! The following states how damage to the

trimmer and possible injury to people can be avoided:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach GS55 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info