Bedienungsanleitung Scheppach GS55 (Seite 21 von 60) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

781395

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

7. Before starting the equipment

m IMPORTANT!

You must fully assemble the appliance before

using it for the rst time!

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage

• Check the device and accessory parts for trans-

port damage. When complaints the dealer must be

informed immediately. Subsequent complaints will

not be accepted

• If possible, store the packaging until the warranty

period has expired

• Read the operating instructions to make yourself

familiar with the device prior to using it.

• Only use original parts for accessories as well as

for wearing and spare parts. Spare parts are avail-

able from your specialized dealer.

• Specify our part numbers as well as the type and

year of construction of the device in your orders.

• Before you connect the equipment to the power

supply make sure the data on the rating plate are

identical to the mains data.

m WARNING!

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

8. Montage

m WARNING!

Always pull the power plug before making adjust-

ments to the equipment.

Assembling the machine stand (Fig. B-E)

• Place the washer (12) on the axle (11) and insert it

into the holes of the support feet (15)

• Place the sleeve (13) and the wheel (4) on the axle

(11).

• Place the lock nut (14) on the thread and tighten it

with the supplied wrench (a).

• After tightening the lock nut (14), mount the wheel

cap (5) onto the wheel (4). The position is indicated

by the grooves (16).

• Repeat the above steps on the opposite side

(Fig. D).

Residual risks

The machine has been built according to the state of

the art and the recognised technical safety require-

ments. However, individual residual risks can arise

during operation.

• The use of incorrect or damaged mains cables can

lead to injuries caused by electricity.

• Release the handle button and switch off the ma-

chine prior to any operations.

• Even if you use this electric power tool in accord-

ance to instructions, certain residual risks cannot

be eliminated.

• Remaining hazards can be minimized by following

the instructions in „Safety instructions“, „Intended

Use“ and in the entire operating manual.

• Avoid accidental starts: do not press the start but-

ton while inserting the plug into the socket.

• Use the tool that is recommended in this manual.

In doing so, your machine provides optimal perfor-

mance.

• Hands may never enter the processing zone when

the machine is in operation.

6. Technical data

Dimensions L x W x H 480 x 380 x 910 mm

Blade cylinder Ø180 mm

Number of blades 2

Collection box capacity 45 l

Transport wheels Ø 175 mm

Weight 10 kg

Branch thickness max Ø 45 mm

Motor 230-240V~ 50Hz

Nominal consumption P1 2400 W

Revolutions max. 4200 1/min

Operating type P40

Subject to technical changes!

Noise levels

Guaranteed sound power level LWA 106 dB(A)

Measured sound power level LWA 103,8 db(A)

Measurement uncertainty K 2,46 dB(A)

Sound pressure level LpA 95,5 dB(A)

Measurement uncertainty KpA 3 dB(A)

Note: The specied sound levels have been deter-

mined using a standardised test procedure and can

be used to compare different electronic devices. Fur-

thermore, these values can be used to assess in ad-

vance the strain on the user caused by the sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach GS55 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info