Bedienungsanleitung Scheppach HL810 (Seite 23 von 92) (Deutsch, Englisch, Französisch, Italienisch)

781857

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical and elec-

tronic equipment (WEEE). This product must be dis-

posed of at a designated collection point. This can

occur, for example, by handing it in at an authorised

collecting point for the recycling of waste electrical

and electronic equipment. Improper handling of

waste equipment may have negative consequences

for the environment and human health due to poten-

tially hazardous substances that are often contained

in electrical and electronic equipment. By properly

disposing of this product, you are also contributing

to the effective use of natural resources. You can

obtain information on collection points for waste

equipment from your municipal administration, pub-

lic waste disposal authority, an authorised body for

the disposal of waste electrical and electronic equip-

ment or your waste disposal company.

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: splitting wedge guides, hydraulic oil, split-

ting wedge

* Not necessarily included in the scope of delivery!

ATTENTION ! Observe the correct direction of rota-

tion when inserting the saw blade.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

15. Troubleshooting

The table below contains a list of error symptoms and explains what you can do to solve the problem if your tool fails to

work properly. If the problem persists after working through the list, please contact your nearest service workshop.

Malfunction Possible cause Remedy

The hydraulic pump does not

start

No electric power Check cable for electric power

Thermal switch of motor cut off Engage thermal switch inside the motor casing

again

The column does not move

down

Low oil level 

One of the levers not connected 

Dirt in the rails Clean the column

Motor starts but column does

not move down

Wrong turning direction of 3-phase

motor Check turning direction of motor and change

16. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic.

Defective components must be disposed of as spe-

cial waste. Ask your dealer or your local council.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL810 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info