Bedienungsanleitung Scheppach KZS2000 Primaster (Seite 28 von 56) (Deutsch, Englisch, Französisch)

782511

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

28 | GB

q) If the workpiece or blade becomes jammed,

turn the mitre saw o󰀨. Wait for all moving

parts to stop and disconnect the plug from

the power source and/or remove the battery

pack. Then work to free the jammed material.

Continued sawing with a jammed workpiece could

cause loss of control or damage to the mitre saw.

r) After nishing the cut, release the switch,

hold the saw head down and wait for the blade

to stop before removing the cut-o󰀨 piece.

Reaching with your hand near the coasting blade

is dangerous.

s) Hold the handle rmly when making an incom-

plete cut or when releasing the switch before

the saw head is completely in the down posi-

tion. The braking action of the saw may cause

the saw head to be suddenly pulled downward,

causing a risk of injury.

Safety Instructions for the handling of saw blades

1 Do not use damaged or deformed saw blades.

2 Do not use any insertion tools with cracks. Sort

out cracked insertion tools. Repairs are not per-

mitted.

3 Do not use saw blades made of high speed steel.

4 Check the condition of the saw blades before us-

ing the multifunction sliding cross cut mitre saw.

5 Make sure that a suitable saw blade for the mate-

rial to be cut is selected.

6 Only use saw blades recommended by the manu-

facturer.

Saw blades designed to cut wood and similar

materials must comply with EN 847-1.

7 Do not use saw blades made of high-speed alloy

steel (HSS steel).

8 Only use saw blades for which the maximum per-

missible speed is not lower than the maximum

spindle speed of the multifunction sliding cross

cut mitre saw and which are suitable for the ma-

terial to be cut.

9 Observe the saw blade direction of rotation.

10 Only insertion the saw blade if you have mastered

their use.

11 Observe the maximum speed. The maximum

speed specied on the insertion tool may not be

exceeded. If specied, observe the speed range.

12 Clean grease, oil and water o󰀨 of the clamping

surfaces.

13 Do not use any loose reducing rings or bushes

for the reducing of holes on saw blades.

14 Make sure that xed reducer rings for securing

the insertion tool have the same diameter and

have at least 1/3 of the cutting diameter.

15 Make sure that xed reducer rings are parallel

to each other.

16 Handle insertion tool with caution. They are ide-

ally stored in the originally package or special

containers. Wear protective gloves in order to im-

prove grip and to further reduce the risk of injury.

17 Prior to the use of insertion tools, make sure that

all protective devices are properly fastened.

18 Prior to use, make sure that the insertion tool

meets the technical requirements of this electric

tool and is properly fastened.

19 Only use the supplied saw blade for cutting wood,

never for the processing of metals.

20 Only use saw blade diameters in accordance with

the markings on the saw.

21 Use additional workpiece supports, if required for

workpiece stability.

22 Workpiece support extensions must always be

secured and used during work.

23 Replace table inserts when worn!

24 Avoid overheating of the saw teeth.

25 When sawing plastic, avoid melting of the plastic.

Use the appropriate saw blades for this purpose.

Replace damaged or worn saw blades immedi-

ately.

When the saw blade overheats, stop the machine.

Allow the saw blade to cool down before using

the machine again.

Attention: Laser radiation

Do not stare into the beam

Class 2 laser

Protect yourself and you environment from ac-

cidents using suitable precautionary measures!

• Do not look directly into the laser beam with un-

protected eyes.

• Never look into the path of the beam.

• Never point the laser beam towards reecting sur-

faces and persons or animals. Even a laser beam

with a low output can cause damage to the eyes.

• Caution - methods other than those specied here

can result in dangerous radiation exposure.

• Never open the laser module. Unexpected expo-

sure to the beam can occur.

• The laser may not be replaced with a di󰀨erent type

of laser.

• Repairs of the laser may only be carried out by the

laser manufacturer or an authorised representa-

tive.

Residual risks

The machine has been built according to the state

of the art and the recognised technical safety re-

quirements. However, individual residual risks

can arise during operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach KZS2000 Primaster Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info