Bedienungsanleitung Scheppach MT140 (Seite 24 von 52) (Deutsch, Englisch, Französisch)

757078

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

24 І 52

XI. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies

with the applicable VDE and DIN provisions.

m Attention!

The power supply cord of this machine has an

equipment-grounding conductor and a ground-

ing plug. The plug must be plugged into an ap-

propriate outlet which is properly installed and

grounded in accordance with all local codes and

ordinances.

m Warning!

Check the voltage! The voltage must comply with

the information on the rating label!

The customers’ mains connection as well as the

extension cable used must also comply with

these regulations.

Damaged electrical connection cable

The insulation on electrical connection cables is of-

ten damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been

cut due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insulation

damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking “V-90/5V-90 3 x 1.00

mm2”.

The printing of the type designation on the connec-

tion cable is mandatory.

Limit the noise to a minimum!

• Only use appliances which are in perfect working

order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever neces-

sary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

X. Storage/Transport

Store the equipment and accessories out of children’s

reach in a dark and dry place at above freezing tem-

perature. The ideal storage temperature is between 5

and 30 °C. Store the electric tool in its original pack-

aging.

When putting cutting wheels in storage, be care-

ful to:

• Clean and dry them well. CAUTION: Do NOT clean

synthetic resin cutting wheels with water or other

uids!

• Store them lying down at.

• Avoid dampness, freezing temperatures, direct

sunshine, high temperatures and temperature uc-

tuations, as these can cause breakage and splin-

tering.

• Before re-using a resin cutting disc, make sure

of the use-by (expiration) date (quarter and year,

stamped on the arbor ring). If this date has been

exceeded, do NOT use the cutting .

• Always check new cutting wheels or cutting

wheels that have been in storage to make sure

that they are free of defects and before the rst

cut test-run the tool at top speed for at least 60 sec-

onds. Keep body parts and people well away out of

range of the direction of the cutting wheel during

this test.

TRANSPORT (SEE FIG. 1/7)

Transport Lock:

Head lock pin (8) will facilitate easier handling at

transport to various places of use .

Attention! Pull out the mains plug

Use the handle (10) for transport of the machine.

Machine lock (transport lock)

To transport the machine, place the machine head

down and push the head lock pin (8).

Unlock the machine (working position)

Push the machine head (9) downwards to release the

transport lock. Pull the head lock pin (8) out and con-

duct the machine head upwards slowly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MT140 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info