Bedienungsanleitung Scheppach MTP860H (Seite 25 von 64) (Deutsch, Englisch, Französisch, Polnisch)

781993

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

25GB

14 Avoid accidental starting. Be sure the engine is off

before transporting the machine or performing any

maintenance or service on the unit. Transporting or

performing maintenance or service on a machine

with engine on invites accidents.

Fuel Safety

1 Fuel is highly ammable, and its vapors can explode

if ignited. Take precautions when using to reduce the

chance of serious personal injury.

2 When relling or draining the fuel tank, use an ap-

proved fuel storage container while in a clean,

well-ventilated outdoor. Do not smoke, or allow

sparks, open ames or other sources of ignition near

the area while adding fuel or operating the unit. Nev-

er ll fuel tank indoors.

3 Keep grounded conductive objects, such as tools,

away from exposed, live electrical parts and connec-

tions to avoid sparking or arcing. These events could

ignite fumes or vapors.

4 Always stop the engine and allow it to cool before

lling the fuel tank. Never remove the cap of the fuel

tank or add fuel while the engine is running or when

the engine is hot. Do not operate the machine with

known leaks in the fuel system.

5 Loose the fuel tank cap slowly to relieve any pres-

sure in the tank.

6 Never over ll fuel tank. Fill tank to no more than

12.5mm (1/2” below the bottom of the ller neck to

provide space for expansion as the heat of the en-

gine can cause fuel to expand).

7 Replace all fuel tank and container caps securely

and wipe up spilled fuel. Never operate the unit with-

out the fuel cap securely in place.

8 Avoid creating a source of ignition for spilled fuel. If

fuel is spilled, do not attempt to start the engine but

move the machine away from the area of spillage

and avoid creating any source of ignition until fuel

vapors have dissipated.

9 Store fuel in containers specically designed and ap-

proved for this purpose.

10 Store fuel in a cool, well-ventilated area, safely away

from sparks, open ames or other sources of igni-

tion.

11 Never store fuel or machine with fuel in the tank in-

side a building where fumes may reach a spark, open

ame, or other sources of ignition, such as a water

heater, furnace, clothes dryer and the like. Allow the

engine to cool before storing in any enclosure.

Instructions for use and maintenance of the machine

1 Never pick up or carry a machine while the engine

is running.

2 Do not force the machine. Use the correct machine

for your application. The correct machine will do the

job better and safer at the rate for which it was de-

signed.

3 Do not change the engine governor settings GB or

over-speed the engine. The governor controls the

maximum safe operating speed of the engine.

4 Do not run the engine at a high speed when you are

not tilling.

5 Do not put hands or feet near rotating parts

6 Avoid contact with hot fuel, oil, exhaust fumes and

hot surfaces. Do not touch the engine or mufer.

These parts get extremely hot from operation. They

remain hot for a short time after you turn off the unit.

Allow the engine to cool before doing maintenance

or making adjustments.

7 If the machine should start to make an unusual noise

or vibration, immediately shut off the engine, discon-

nect the spark plug wire, and check for the cause.

Unusual noise or vibration is generally warning of

trouble.

8 Use only attachments and accessories approved by

the manufacturer. Failure to do so can result in per-

sonal injury.

9 Maintain the machine. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the machine’s opera-

tion. If damaged, have the machine repaired before

use. Many accidents are caused by poorly main-

tained equipment.

10 Keep the engine and mufer free of grass, leaves,

excessive grease or carbon build up to reduce the

chance of a re hazard.

11 Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

12 Never douse or squirt the unit with water or any other

liquid. Keep handles dry, clean and free from debris.

Clean after each use.

13 Observe proper disposal laws and regulations for

gas, oil, etc. to protect the environment.

14 Store idle machine out of the reach of children and

do not allow persons unfamiliar with the machine or

these instructions to operate it. Machine is danger-

ous in the hands of untrained users.

Instructions for maintenance

Before cleaning, repair, inspecting, or adjusting, shut

off the engine and make certain all moving parts have

stopped. Disconnect the spark plug wire, and keep the

wire away from the plug to prevent accidental starting.

Have your machine serviced by qualied repair person-

nel using only identical replacement parts. This will en-

sure that the safety of the machine maintained.

Specic safety rules for Petrol Power Cultivator

1 Thoroughly inspect the area to be tilled, and remove

all debris and hard or sharp objects such as stones,

sticks, glass, wire, bones, etc.

2 Do not operate tiller in soil with large rocks and for-

eign objects which can damage the machine.

3 Do not till above underground electric cables, tele-

phone lines, water lines, gas line, pipes, or hoses. If

in doubt, contact your utility or telephone company to

locate underground services.

Scheppach MTP860H Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info