781929
24
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
24
The specified position for the transport
of the machine must be precisely ob-
served.
Suspended loads can fall down, entail-
ing life-threatening danger - do not
stand under suspended loads!
If load attachment points other than
those specified are used, severe dam-
age to the machine can result.
Positioning the machine at an incline
during transport can cause lubricants,
etc. to spill out; in the event of direct
contact with this skin there is a risk of
skin irritation.
No persons may be transported along
with the machine.
Transporting the Muli 4000
The conveyor belt with belt width of 25cm
can moved in working position, in other
words unfolded. For this purpose, simply
raise the front and shift the conveyor belt to
the desired position.
For long distance transport or for storage,
however, it is advantageous to fold the con-
veyor belt. To do so, proceed in reverse
sequence as described in the chapter "Un-
folding".
It is advantageous to then store the conveyor
belt on a wooden pallet in order to further
simplify the transport.
Service
Safety instructions for service work
The service work prescribed in the operating
manual - setup, cleaning, lubrication,
maintenance, inspection, etc. - must be per-
formed according to the specified periods.
Prior to performing ser-
vice tasks, the following
points must be observed:
For electric drives
Switch off the central power supply with the
main switch, lock the main switch and hang a
warning sign to prevent restarting.
For tractor drive
Switch off the tractor, pull out the key and
disconnect both hydraulic hoses from the
tractor. Set up a warning sign to prevent
restarting / ignition.
Switching on the machine
during service tasks can
lead to severe bodily
injury and machine dam-
age.
Additional safety instructions
Make sure that all machine parts have
cooled down to ambient temperature.
Make sure that appropriate lifting
equipment and load-bearing equip-
ment is available for the replacement
of larger machine parts.
Unauthorised persons are strictly
prohibited from entering the plant ar-
ea! All persons who are not assigned
with the work on the machine are un-
authorised persons.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Scheppach Muli 4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info