Bedienungsanleitung Scheppach WDS 999 Kraft Werkzeuge (Seite 19 von 36) (Deutsch, Englisch, Französisch)

781891

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

19 І 36

e) Do not use chains or toothed chain or toothed

saw blade. Such tools often cause a kickback or

loss of control of the power tool.

Safety notes regarding grinding with sandpaper

a) Do not use oversized abrasive sheets; al-

ways observe the manufacturer‘s specica-

tions for abrasive sheet dimensions.

Abrasive sheets protruding the grinding plate

may cause injury or result in the blocking or tear-

ing apart of the abrasive sheet or in kickbacks.

Additional safety notes

a) Connect a vacuum cleaner to the supplied

adapter before starting your operations.

b) Attention! Keep away grinding dust from open

Iire. Dust may be explosive.

c) Always wear goggles and a dust mask when

grinding, in particular du ring overhead work

and when processing critical materials!

When grinding certain materials (e .g.lead paint,

certain types of wood and metaI) harmful or nox-

ious dust may be generated. Touching or breath-

ing in such dust may imply risks for the operator

or people in the vicinity.

Notes regarding vibration and noise emissions

Reduce noise emissions and vibrations to a mini-

mum!

1. Only use power tools which are free of defects.

2. Maintain and clean the power tool on a regular

basis.

3. Adjust your way of working to the power tool.

4. Do not overload your power tool.

5. Have your power tool inspected, if necessary.

6. Switch off the power tool when it is not in use.

Remaining risks

Even if you use this power tool in compliance with the

regulations, there are still remaining risks. The follow-

ing risks may occur due to the type and design of the

power tool:

a) Damage caused to your health resulting from

hand/arm vibrations if the power tool is used over

a Ionger period of time or if it is not properly used

and maintained.

b) Injury and damage to property caused by ying

off insertion tools which are unexpectedly ex-

pelled from the power tool due to sudden dam-

age, wear or incorrect insertion.

c) Burns and cuts if the insertion tools are touched

directly after use and/or with your bare hands.

m WARNING! This electric tool generates an

electromagnetic eld during operation. This eld

can impair active or passive medical implants

under certain conditions. In order to prevent the

risk of serious or deadly injuries, we recommend

that persons with medical implants consult with

their physician and the manufacturer of the medical

implant prior to operating the electric tool.

m) Switch oft the power tool while you carry it

around.

Your clothes may be trapped when unintentionally

getting in contact with the rotating insertion tool

and the insertion tool may penetrate your body.

n) The ventilation slots of your power tool must

be cleaned on a regular basis.

The motor fan sucks in dust, and the accumula-

tion of metal dust may cause electrical risks.

o) Do not use the power tool in the vicinity of

inammable materials.

Sparks may ignite these materials.

p) Do not use insertion tools which require liq-

uid coolants.

Using water or other liquid coolants may cause

electric shock.

Further safety notes for all applications &

kickback

A kickback is the sudden reaction caused by rotating in-

sertion tools such as a grinding disk, grinding plate, wire

brush, etc. which has got caught or which blocks. Getting

caught or blocking results in the immediate stop of the

rotating insertion tool. This accelerates the uncontrolled

power tool against the rotary direction of the insertion tool.

lf for example a grinding disk gets caught or blocks

in the work piece, the edge of the grinding disk which

penetrates the work piece may get caught, the grind-

ing disk will make a sudden movement or cause a

kickback. As a result, the grinding disk moves towards

the operator or away from the operator, depending on

the rotary direction of the disk when it blocks. This

may also cause the fracture of grinding disks.

Kickbacks are the result of the improper or incorrect

use of power tools.

Kickbacks can be avoided when observing the follow-

ing precautionary measures.

a) Hold the power tool rmly in your hands and bring

your body and arms in a position which allows

you to adequately react to kickback forces. Al-

ways use the additional handle, if available. This

ensures you the utmost control of kickback forc-

es or reaction torques when starting your power

tool. When taking appropriate precautions, the

operator is in the position to control kickback and

reaction forces.

b) Keep your hands away from rotating insertion

tools. The insertion tool may move over your

hand in the event of a kickback.

c) Keep your body away from the area where the

power tool may move in the event of a kickback.

Kickbacks always move the power tool in op-

posite direction to the movement of the grinding

disk at the spot where it blocks.

d) Corners, sharp edges, etc. must be processed

with special care. Make sure that the insertion

tool does not bounce back from or get trapped

on the work piece. The rotating insertion tool

tends to jam in corners, at sharp edges or when

it bounces back. This may cause the loss of con-

trol or a kickback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach WDS 999 Kraft Werkzeuge Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info