Bedienungsanleitung Scheppach WDS 999 Kraft Werkzeuge (Seite 20 von 36) (Deutsch, Englisch, Französisch)

781891

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

20 І 36

to the transport company which was used to deliver

the power tool.

• Avoid long supply lines (extension cables).

• Do not operate the power tool in a damp or wet room.

• The power tool may only be operated in suitable

rooms (well ventilated).

8. Attachment and operation

m IMPORTANT!

You must fully assemble the appliance before us-

ing it for the rst time!

m WARNING!

Neither power tools nor packaging materials are

toys! Children must not play with plastic bags,

foils and small parts! Danger of swallowing and

suffocation!

m Before you connect the equipment to the mains

supply make sure that the data on the rating plate are

identical to the mains data.

m WARNING! Always pull the power plug before

making adjustments to the equipment.

8.1. Installation (g.1-3)

-Fold the front and back part together. And then

tighten the wing nut (3).

Fitting the telescopic extension (g. 4)

Insert the telescopic extension (11) into the connec-

tion for the telescopic extension (12) and lock it by

twisting as shown in Fig. 4.

Note: Adjust the Telescopic Plasterboard Sander

with the telescopic extension (11) so that you can

work with it most comfortably. The machine can also

be used without telescopic extension.

8.2. Selecting the right abrasive paper

1. The grain size of the sandpaper is specied on

its rear side. The smaller the specied number,

the coarser the graining.

2. Use sandpaper with coarse grain for rough grind-

ing, and sandpaper with ne grain for nishing.

We recornrnend sandpapers with aluminium ox-

ide, silicon carbide or other synthetic abrasives.

3. lf you can chose between sandpapers with dif-

ferent graining, you should start with coarse

graining sandpaper and complete the grinding

process with the nest possible graining. Thus

you will get good and smooth grinding results.

8.3. Attaching and replacing the sanding paper

Apply the sandpaper (16) to the grinding plate (1) us-

ing the Velcro strip mechanism.

1. Align the sandpaper (16) with the grinding plate

(1) and press it on evenly.

2. PuII the sandpaper (16) off the grinding plate

(1) and replace it with a new one or another one

(Fig.7).

6. Technical data

Mains connection 230-240 V~ 50Hz

Motor rating W 710

Operating mode S1

Nominal speed

(oscillation rate) n 700-1700 min-1

Spindle size M 14

Grinding disc diameter Ø 225 mm

Abrasive paper diameter Ø 225 mm

Protection class II /

Weight in kg ca. 4,5 kg

Sound pressure Ievel LpA 91 dB(A)

Sound power Ievel LWA 102 dB(A)

Uncertainty K (KpA / KWA) 3 dB(A)

Hand-Arm-Vibration

When grinding with abra-

sive sheets,DS 3,24 m/s²

Uncertainty K 1,5 m/s²

The specied hand-arm vibration value is based on

grinding with an abrasive sheet. Different applications

may result in different values.

The noise and vibration values were determined ac-

cording to EN 60745-1 and EN 60745-2-3.

The specied vibration value was measured an the

basis of a standard test method and can be used to

compare any kind of power tools.

The specied vibration value can also be used for the

initial evaluation of exposure.

m WARNING! Depending on how you use the

power tool, the actual vibration values may

deviate from the specied values!

Take measures to protect yourself against

vibrations!

Make sure to take into account the entire work

process, i.e. also times when the power tool

is operated without Ioad or switched off!

Appropriate measures include the regular

maintenance and care of the power tool and its

attachments, keeping your hands warm, regular

breaks and well planned work processes!

Wear hearing protection.

The effects of noise can cause a loss of hearing.

7. Before starting the equipment

Before you connect the equipment to the mains sup-

ply make sure that the data on the rating plate are

identical to the mains data.

• Check the equipment for damage which may have

occurred in transit. Report any damage immediately

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach WDS 999 Kraft Werkzeuge Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info