Bedienungsanleitung Scholtes fm 8861 mt (Seite 19 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

330643

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

• Make a small well in the mound of flour.

• Pour in water and yeast mixture.

• Knead dough by stretching and folding it over itself with the

palm of your hand for 10 minutes until it has a uniform

consistency and is not too sticky.

• Ball and cover the dough with plastic wrap and leave it to

leaven at room temperature for 1 - 1 ½ hours (until it has

doubled in size).

• Cut the dough into equal sized loaves.

• Place them in the dripping pan on oven paper.

• Cover the loaves with flour.

• Make incisions on the loaves.

• Pour 100 ml of cold distilled water onto the bottom of the

oven. For cleaning purposes, we recommend the use of

water and vinegar.

• Place loaves inside the cold oven.

• Start BREAD cooking mode

• Once baked, leave the loaves on one of the grills until they

have cooled completely.

PIZZA mode

To obtain the best results, we recommend that you carefully

observe the instructions below:

• follow the recipe.

• the weight of the dough should be between 500g and

700g.

• lightly grease the dripping pan.

Recipe for PIZZA:

1 Dripping pan, Lower level, Hot or cold oven

Recipe for 3 pizzas of approximately 550g: 1000g flour, 500ml

water, 20g salt, 20g sugar, 100ml olive oil, 20g fresh yeast (or

2 sachets of powder yeast)

• leavening at room temperature: 1 hour.

• place inside hot or cold oven.

• start PIZZA cooking mode.

Programming cooking

! A cooking mode must be selected before programming can

take place.

Programming the duration

1. Press the

; button; the button and the numbers on

the TIME display will flash.

2. To set the duration, press buttons "+" and "-"; press and

hold to scroll the numbers quicker and make setting easier.

3. Once the desired duration setting is reached, wait 10

seconds for the selection to be memorized, or press button

again to fix the setting.

4. When the set time has elapsed, END appears on the

TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour and 15

minutes is programmed. The programme will stop

automatically at 10:15 a.m.

Programming delayed cooking

1. Press the

button and repeat steps 1 to 3 as described

for the duration setting.

2. Then press the

button and set the end of cooking time

by pressing buttons "+" and "-"; press and hold to scroll the

numbers quicker and make setting easier.

3. Once the end of cooking time is reached, wait 10 seconds

for the selection to be memorized, or press the

button

again to fix the setting.

4. Press the “START” button to confirm the programming

process.

5. When the selected time has elapsed, END appears on the

TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour and 15

minutes is programmed and the end time is set to 12:30.

The programme will start automatically at 11:15 a.m.

The

and buttons will flash signalling that the

programmed mode has been set. After programming, in the

time before cooking starts, the TIME display indicates the

duration and end of cooking time alternately.

To cancel a programming procedure press the "STOP" button.

! When selecting a cooking mode, the button is activated

whereas the

button is not. When setting the cooking time,

the

button is illuminated and delayed cooking can be

programmed.

Practical cooking advice

! Do not place racks in position 1 and 5 during fan-assisted

cooking. Excessive direct heat can burn temperature sensitive

foods.

! In the TURNSPIT, BARBECUE and ROTISSERIE cooking

modes, particularly when using the rotisserie, place the

dripping pan in position 1 to collect cooking residues (fat and/

or grease).

MULTI-COOKING

• Use position 2 and 4, placing the food that requires more

heat on 2.

• Place the dripping pan on the bottom and the rack on top.

BARBECUE

• Insert the rack in position 3 or 4. Place the food in the

centre of the rack.

• We recommend that the temperature is set to its maximum

level. The top heating element is regulated by a thermostat

and may not always be on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scholtes fm 8861 mt Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info