Bedienungsanleitung Scott BMX - 2014 (Seite 7 von 15) (Englisch)

664187

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

12 scott-sports.com 13

BMXENGLISH

BIKE OWNER’S MANUAL

Front Wheel Secondary Retention Devices

Most bicycles have front forks which utilize a secondary wheel retention device to keep

the wheel from disengaging if the quick release is incorrectly adjusted. Secondary

retention devices are not a substitute for correct quick release adjustment.Secondary

retention devices fall into two basic categories:

1. The clip-on type is a part which the manufacturer adds to the front wheel hub

or front fork.

2. The integral type is molded, cast or machined into the outer faces of the

front fork dropouts.

Ask your dealer to explain the particular secondary retention device on your bike.

WARNING!

Do not remove or disable the secondary retention device. As its name implies, it serves

as a back-up for a critical adjustment. If the quick release is not adjusted correctly, the

secondary retention device can reduce the risk of the wheel disengaging from the fork.

Removing or disabling the secondary retention device may also void the warranty.

Secondary retention devices are not a substitute for correct quick release adjustment.

Failure to properly adjust the quick release mechanism can cause the wheel to wobble

or disengage, which could cause you to loose control and fall, resulting in serious injury

or death.

Wheels

Bicycle wheels are designed to be removable for easier transportation and for repair of

a tire puncture. In most cases, the wheel axles are inserted into slots, called “dropouts”

in the fork and frame, but some suspension mountain bikes use what is called a

“through axle” wheel mounting system.

If you have a mountain bike equipped with through axle front or rear wheels, make

sure that your dealer has given you the manufacturer’s instructions, and follow those

when installing or removing a through axle wheel. If you don’t know what a through

axle is, ask your dealer.

– Hex nuts or hex key bolts which are threaded on to or into the hub axle

(bolt-on wheel, fig. 10)

Your bicycle may be equipped with a different securing method for the front wheel

than for the rear wheel. Discuss the wheel securing method for your bicycle with your

dealer.

It is very important that you understand the type of wheel securing method on your

bicycle, that you know how to secure the wheels correctly, and that you know how

to apply the correct clamping force that safely secures the wheel. Ask your dealer to

instruct you in correct wheel removal and installation, and ask him to give you any

available manufacturer’s instructions.

Fix a flat tire

Bike tires are fitted with tubes.

Remove the wheel from the bike and deflate it. Unhook the tire from one side of the

rim, using tire tools, not screwdrivers.

Remove the tube from the tire casing, repair or replace it. Install the new or repaired

tire. Fill the tube lightly with air in order to let it take its shape. Put the valve stem

through the hole, and fit the inside tire. Put the tire bead in the rim starting at the valve

and finishing at the opposite end, working on both sides. Push the valve stem into the

tire and pull it back down to seat. Make sure the tube is not pinched under the tire

bead. Inflate with hand or foot-pump.

Close the brake’s quick release system carefully.

Use of a bicycle hauler

SCOTT bikes are not intended for the use of haulers (load-haulers, kids-haulers, Trailer

bikes).

Please note that SCOTT will not take any warranty or responsibility when using a

hauler.

There are too many different haulers and hauler fixation systems on the market to give

a detailed table of systems that might fit without technical problems or endangering

the passengers.

Use of a baby seat

SCOTT bikes of Racing Concept, Racing, Endurance, Progressive, Road, Roadster and

Kids Series are not intended for the use of baby seats.

Please note that SCOTT will not take any warranty or responsibility when using a baby

seat on bikes mentioned above.

There are too many different baby seat and baby seat fixation systems on the market

to give a detailed table of systems that might fit without technical problems or

endangering the passengers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scott BMX - 2014 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scott BMX - 2014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info