04/2021
- 7 -
Copyright © 2021, F
EN F
User'smanual
■ Prior to using this appliance, please read the user’
have experience in using similar appliances. Only use the appliance in the manner described
in this user’smanual. Keep this user’
for future use.
■ We rec
and responsibility statement of the vendor or warranty card f
legal liability for unsatisfactory per
recommend that you pack the appliance in the original bo
DESCRIPTION OF
A1 Button for releasing the meat grinder
from the front attachment hub
A2 Removable cover of the front mea
grinder attachment hub
A3 A-shaped beater
A4 Balloon whisk
A5 Kneading hook
A6 Removable cover of the top blender
attachment hub
A7 Tilt-out multi-function head
A8 Attachment hub for mounting
attachments A3 –A5
A9 Bowl cover with ahole for adding
ingredients
A10 4.5-litre stainless steel bowl
A11 Base unit
A12
Serves to gradually set the speed level
MIN-1-2-3-4-5-6-MAX, set the pulse
level (PULSE) and to turning off the
appliance (OFF).
A13 Multi-function head release lock
A14 Anti-slip feet for stability of the
appliance during operation
A15 Lid
serves to close the stainless steel bowl
A10 for short term storage of processed
ingredients.
DESCRIPTION OF MEA
B1 Pusher
B2 Stainless steel hopper
B3 Feed tube
B4 Grinding chamber
B5 Screw shaft
B6 Grinding blade
B7 Screw ring
B8 Fine grinding plate
B9 Medium fine grinding plate
B10 Coarse grinding plate
B11 Separator
B12 Sausage stuffer attachment
B13 Moulder
B14 Conical attachment
B15 Cookie maker
B16 Cookie maker holder
Note:
Parts B11 –B14 are contained inside the pusher B1 .
Certain models are only equipped with aB8
and B10 .
DESCRIPTION OF
C1 Inner cap of the blending jar
C2 Outer lid of the blending jar with ahole
for adding ingredients
C3 Handle
C4 Glass blending jar with 1.5l capacity
C5 Cu
C6 Blade assembly
BEFORE FIRST USE
1. T
2. Thoroughly wash all accessory parts that are intended to come into contact with food using
warm water and a
thoroughly wipe dry with a
and drying, we recommend to coat the grinding blade B6 and the grinding plates B8 –B10
with cooking oil.
3. Do not submer
Attention:
The metal parts of the meat grinder and attachments A3 –A5 are not
intended for washing in a dishwasher. Other removable parts may be
washed in adishwasher
BEA
SELECTING
Attachment type Purpose of use
Beater A3 It is used for beating light and medium heavy yeast-free doughs,
for preparing sauces, creamsDo not use it for
kneading heavy doughs.
Balloon whisk A4 It is used for whisking whole eggs or egg whites, whipped
cream, foamy creams Do not use it for beating or
kneading doughs.
Kneading hook A5 It is used for kneading various types of doughs including heavy
and thick doughs such as for example bread dough, pizza
dough, fresh pastry doughs, etc.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
■ Before you start assembling or disassembling the food processor
and disconnected from the el. power socket.
1. Inserting the bowl and attaching the co
1.1 Place the food pr kitchen
countertop.
1.2 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After tilting
out the multi-function head A7 release the lock A13 . Locking of the multi-function head A7
inthe top open position is indicaA13 returning to the default position, which
is accompanied by an audible click.
1.3 InserA10 into the base unit A11 and secur
clockwise. When the bo A10 is properly attached, it cannot be separately lifted out of the
base unit A11 .
1.4 On to the bottom part of the multi-function head A7 with attachment hub A8 , slide the
cover A9 so that the latches along the perimeter of the rA9 slide
into the grooves along the perimeter of the aA8 .
1.5 The lid A15 is used for covering the bowl A10 for short term storage of processed
ingredients.
2. Mounting a
2.1 When attaching an attachment, the multi-function head A7 must be locked in the open
position, see point 1.2 in the previous chapterA8 , attach one of
the attachments A3 –A5 in such aA8 slides into the
attachment. Push the attachment toA8 and turn it anticlockwise
to secure it in place. Lightly pull the attachment do
is properly attached.
2.2 Place the ingredients that y A10 . Release the lock A13 and
tilt the multi-function head A7 to ahorizontal position. After tilting down the multi-function
head A7 , release the lock A13 . TA7 in the tilted
down work position is indicated by the lock A13 returning t
accompanied by an audible click.
3. Disassembly
3.1 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After tilting
out the multi-function head A7 , release the lock A13 . Locking of the multi-function head A7
inthe top open position is indicaA13 returning to the default position, which
is accompanied by an audible click.
3.2 Push the attachment towards the attachment hubA8 and turn it clockwise to release it,
and then remove it. A10 anticlockwise and remove it from the base unit A11 .
Remove the cover A9 by pulling it doA7 back to the
horizontal position.
USING THE FOOD PROCESSOR
1. Select the right type of attachment based on its intended use and assemble the appliance
according to the instructions in the chapter Assembling and disassembling the appliance.
Place the ingredients into the boA10 .
Attention:
In a
0.8 litres of thick, heavy dough. The maximum number of egg whites tha
whisked at once is 12. A10 past the lev
of the 3l mark. If an insucient amount of ingredients are put in the bowl A10 (less
than 0.3 litres of dough), then they may not be optimally processed.
2. Make sure that the multi-function head A7 is tilted down in the horizontal working position
and that the speed control knob A12 is set to the OFF position. Connect the power cord to
apower socket.
3. SA12 . Gradually turn the speed control
knob A12 clockwise to increase the speed, turning it in the opposite direction will reduce
the speed.
required. Electronic speed regulation ensur
various loads. A10 thr
hole in the cover A9 .
4. The pulse mode is used for increasing the speed t
the pulse mode, turn the speed control knob A12 to the PULSE position and to ensure
continuous operation hold it down in this position. As soon as y
knob A12 , it will automatically return to the OFF position.
5. I A10 and the
attachment, rst turn o the food processor by setting the speed cA12 to the
OFF position and then disconnect it from the power socket.
come to astop and only then scrape away the ing
6. After you have nished using the applianceA12 to the OFF
position and disconnect the power cord from the pow
7. Wait until the rotating parts come to a
the instructions included in chapter Assembling and disassembling the appliance. Use a
plastic spatula to empty out the contents of the bowl A10 .
8. Clean out the food processor after each use according t
Cleaning and maintenance.
LED LIGHT
■ The multi-function head A7 has a LED light that turns on automatically when the food
processor is connected to a power socket.
2.5 minutes of inactivity, i.e. when the appliance is not running or when the speed is not set
during this time.
into operation by the control knob A12 being set to a desired speed lev
