Bedienungsanleitung Sharp HT-SB100 - Soundbar (Seite 7 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

787657

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ū Connect the HDMI cable (not included) from unit‘s HDMI (ARC)

socket to the HDMI (ARC) socket on your ARC compliant TV. Then

press the remote control to select HDMI ARC.

TIPS:

• Your TV must support the HDMI-CEC and ARC function and this

must be set to “ON“ or “ACTIVE“ in the TV settings menu.

• The setting method of HDMI-CEC and ARC may dier depending

on the TV. For details about ARC function, please refer to your TV

manual.

• Only HDMI cables of version 1.4 or higher can support the ARC

function.

OPTICAL input

(Refer to 8 on page 2).

• Remove the protective cap of the OPTICAL socket, then connect an

OPTICAL cable (not included) to the TV’s OPTICAL OUT socket and

the OPTICAL socket on the unit.

TIP:

While in HDMI ARC/OPTICAL mode, if there’s no sound output from

the unit and the HDMI ARC/OPTICAL lights ashes quickly, you may

need to activate PCM signal output on your source device (eg. TV, DVD

or Blu-ray player).

AUX

(Refer to 9 on page 2).

A. Use a RCA to 3.5mm audio cable (not included) to connect the TV’s

audio output sockets to the AUX socket on the unit.

B. Use a 3.5mm to 3.5mm audio cable (not included) to connect the

TV’s or external audio device headphone socket to the AUX socket

on the unit.

TIP:

When you use the headphone output on the TV set, you will be able to

adjust the volume level directly using the TV remote control.

Connect to power

(Refer to 10 on page 2).

• Before connecting the AC power cord, ensure you have completed

all other connections.

• Risk of product damage! Ensure that the power supply voltage

corresponds to the voltage printed on the back or the underside

of the unit.

• Connect the power cable to the AC~ Socket of the unit and then

into a power socket.

Basic operation

Standby/ON

• When you rst connect the unit to the power socket, the unit will be

in STANDBY mode. The indicator will light up red.

• Press on the remote control to switch the soundbar ON or OFF.

• Disconnect the plug from the power wall socket if you want to

switch the unit o completely.

ūThe soundbar can also be controlled when connected via HDMI CEC.

ūIf a TV or an external device (Only for AUX socket) is connected, the

unit will switch on automatically when the TV or the external device is

switched on.

ū When the unit has no input signal for over 15 minutes, it will

automatically switch to Standby mode.

Select modes

Press on the unit repeatedly or on the remote control to select the

desired mode.

Red: STANDBY

Green: AUX

Blue: Bluetooth

Yellow: OPTICAL

Cyan: HDMI ARC

Purple: USB

Adjust the volume

ū Press the +/– buttons on the unit or on the remote control to adjust

the volume.

ū If you wish to turn the sound o, press on the remote control or

the soundbar. Press again or press the +/– on the unit or on the

remote control to resume normal listening.

ū While adjusting the volume, the status indicator ashes quickly.

When maximum or minimum volume levels are achieved, the

ashing will stop.

Select equaliser (EQ) eect

During playback, press the EQ button on the remote control to select

between preset equalisers. Each time the EQ button is pressed the

soundbar will change between the EQ functions:

• Movie (for movies and lms) - yellow light ashes for 2 seconds.

• Music (for all types of music) - green light ashes for 2 seconds.

• Voice (for listening to dialogue) - red light ashes for 2 seconds.

• Custom (for personal bass/treble settings) - white light ashes for

2 seconds.

Custom settings

• Press the EQ button to enter Custom settings or press either the

BASS or TRE button +/- buttons once, a white light will ash for 2

seconds.

• Use the BASS/TRE buttons on the remote control to increase (+)

or decrease (-) the EQ level. The selected EQ level is indicated by

the speed at which the LED indicator on the Soundbar ashes.

A ashing red LED indicates an increased level, a white LED (not

ashing) indicates the level is at/0, a ashing green LED indicates

a decreased level.

LED colour EQ level Speed LED ashing

RED

+3 Fast

+2 Medium

+1 Slow

White 0 On

Green

-1 Slow

-2 Medium

-3 Fast

NOTE: New EQ changes are saved as default. You have 3 seconds

between each key press to make any changes before the EQ mode exits.

AUX/OPTICAL/HDMI ARC

1. Ensure that the unit is connected to the TV or audio device.

2. While in ON mode, press on the unit repeatedly or on the

remote control to select the desired mode.

3. Operate your audio device directly for playback features.

4. Press +/– button to adjust the volume to your desired level.

TIP:

While in HDMI ARC/OPTICAL mode, if there’s no sound output from

the unit and the HDMI ARC/OPTICAL lights ashes quickly, you may

need to activate PCM signal output on your source device (eg. TV, DVD

or Blu-ray player).

Bluetooth operation

Pair Bluetooth-enabled devices

The rst time you connect your Bluetooth device to this player, you

need to pair your device to this player.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp HT-SB100 - Soundbar Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info