Bedienungsanleitung Sharp HT-SB100 - Soundbar (Seite 8 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

787657

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

NOTE:

ū The operational range between this player and a Bluetooth device is

approximately 8 meters (without any object between the Bluetooth

device and the unit).

ū Before you connect a Bluetooth device to this unit, ensure you know

the device’s capabilities.

ū Compatibility with all Bluetooth devices is not guaranteed.

ū Any obstacle between this unit and a Bluetooth device can reduce

the operational range.

ū If the signal strength is weak, your Bluetooth receiver may

disconnect, but it will re-enter pairing mode automatically.

1. While in ON mode, press on the remote control or on the unit to

select Bluetooth mode. The indicator light will ash blue.

2. Activate your Bluetooth device and select the search mode.

“SHARP HT-SB100” will appear on your Bluetooth device list.

ū If you cannot nd the unit, press and hold on the unit or on the

remote control.

3. Select “Sharp HT-SB100“ from the list of devices. An audio prompt

will sound when it has been successfully connected, and the

indicator will light a solid blue.

4. Begin playing music from the connected Bluetooth device.

To disconnect the Bluetooth function, you can:

ū Switch to another function on the unit.

ū Disable the Bluetooth function on your device. An audio prompt will

sound when it has been successfully disconnected.

ū Press and hold on the unit or on the remote control.

TIPS:

• Enter “0000“ for the password if necessary.

• If no other Bluetooth device pairs with the soundbar in 2 minutes,

the soundbar will reconnect to the previous connection.

• The soundbar will also be disconnected when your device is moved

beyond the operational range.

• If you want to reconnect your device to this soundbar, place it

within the operational range.

• If the device is moved beyond the operational range, when it is

brought back, please check if the device is still connected to the

soundbar.

• If the connection is lost, follow the instructions above to pair your

device to the soundbar again.

Listen to music from Bluetooth device

ū If the connected Bluetooth device supports Advanced Audio

Distribution Prole (A2DP), you can listen to the music stored on the

device through the soundbar.

ū If the device also supports Audio Video Remote Control Prole

(AVRCP), you can use the soundbar‘s remote control to play music

stored on the device.

1. Pair your device with the soundbar.

2. Play music via your device (if it supports A2DP).

3. Use the supplied remote control to control play (if it supports

AVRCP).

ū To pause/resume play, press on the remote control.

ū To skip to a track, press / buttons on the remote control.

USB operation

• Press on the soundbar repeatedly or on the remote control to

select USB mode. Connect the USB memory device containing MP3

les (ash drives up to 32GB supported).

• Press to start playback.

• Turn o the soundbar before removing the USB memory device.

NOTE

SHARP will not be held liable for any loss of data while the USB

memory device is connected to this unit. Always back up your music

before playing on this product.

USB functions (remote control)

ū To play or pause.

ū Skip to next song | Press and hold to fast forward.

ū Skip to beginning of song | Press and hold to quickly rewind.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If

you encounter problems when using this unit, review the following

before requesting service.

No power

Ensure that the AC cord is properly connected.

Ensure that there is power at the AC outlet.

Press standby button on the remote control or soundbar to turn the

soundbar on.

No sound

For HDMI ARC to work, ensure you are using HDMI version 1.4 or

higher.

Increase the volume. Press + on the remote control or on the

soundbar.

Press on the remote control to ensure the soundbar is not muted.

Press to select a dierent input source.

When connected to a digital source (HDMI or Optical), if there is no

audio:

ū Try setting the TV output to PCM or

ū Connect directly to your Blu-ray/other source, some TVs do not pass

through digital audio.

Your TV may be set to variable audio output. Conrm that the audio

output setting is set to FIXED or STANDARD, not VARIABLE. Consult

your TV’s user manual for more detailed information.

If using Bluetooth, ensure that the volume on your source device is

turned up and that the device is not muted.

Remote control does not work

Before you press any playback control button, rst select the correct

source.

Reduce the distance between the remote control and the unit.

Insert the battery with its polarities (+/-) aligned as indicated.

Replace the battery.

Aim the remote control directly at the sensor on the front of the unit.

I hear buzzing or humming

Ensure all cables and wires are securely connected.

Connect a dierent source device (TV, Blu-ray player, etc) to see if the

buzzing persists. If it does not, the problem may be with the original

device.

Connect your device to a dierent input on the soundbar.

I can’t nd the Bluetooth name of this unit on my

Bluetooth device

Ensure the Bluetooth function is activated on your Bluetooth device.

Re-pair the unit with your Bluetooth device.

This device is set to power o after 15 minutes of no

source signal

When the unit’s external input signal level is too low, the unit will be

turned o automatically in 15 minutes. Please increase the volume

level of your external device. This feature is a requirement of ERPII and

is designed to save energy when the Soundbar is not in use.

Sharp HT-SB100 - Soundbar Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info