555850
12
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
12/46
Siemens Heating controllers RVP201 and RVP211 CE1P2464en
Building Technologies 3 Technical design 12.12.2007
3 Technical design
3.1 Operating modes
The RVP211 provides the following operating modes:
Automatic operation normal / protection mode
Automatic changeover between normal temperature and protection mode
according to the 24-hour or weekly program
Automatic d.h.w. heating
Load-dependent switching on and off of the heating in function of the
outside temperature while giving consideration to the building’s thermal
inertia (ECO automatic energy saver)
Optional remote operation with the help of a room unit
Frost protection is ensured
Automatic operation normal / reduced
Automatic changeover between normal and reduced temperature accord-
ing to the 24-hour or weekly program
Automatic d.h.w. heating
Load-dependent switching on and off of the heating in function of the
outside temperature while giving consideration to the building’s thermal
inertia (ECO automatic energy saver)
Optional remote operation with the help of a room unit
Frost protection is ensured
Setback mode
Continuous heating to the reduced temperature
Automatic d.h.w. heating
Load-dependent switching on and off of the heating in function of the
outside temperature while giving consideration to the building’s thermal
inertia (ECO automatic energy saver)
Frost protection is ensured
Normal mode
Continuous heating to the normal temperature
Automatic d.h.w. heating
No ECO automatic energy saver
Frost protection is ensured
D.h.w. heating only
Automatic d.h.w. heating
Control of heating to protection mode
Frost protection is ensured
Protection mode
Heating to the frost protection level
Frost protection is ensured
Manual operation
No control
Heating circuit pump runs
Control with seat or slipper valve: relay de-energized
Control with burner: boiler always ON
D.h.w. charging pump runs or d.h.w. changeover valve is deactivated
The RVP201 does not provide
“d.h.w. heating only”.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens RVP201 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Siemens RVP201

Siemens RVP201 Installationsanweisung - Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch - 26 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info