Bedienungsanleitung Siemens s40 (Seite 31 von 44) (Englisch)

230430

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Auto redial

If you have activated Auto redial

and the phone number you are call-

ing is busy or your call is not

answered, the phone makes up to

10 automatic redial attempts.

A special redialling success tone

is heard when the attempt is suc-

cessful. To cancel the auto redial

attempts, just press the left-hand

function key.

Any key answer

You can answer an incoming call by

pressing any key you like, except

the left-hand function key and the

arrow key, by selecting »Any key

answer on«.

Time and charge

The time and charge menu offers

you the possibility of checking the

duration and cost of your calls.

However, the call charge feature

may not be supported by all net-

work operators.

Status Here you can see the

duration and cost of your latest

incoming and outgoing call, your

total incoming and total outgoing

calls and a total of all calls. You can

also see the remaining credit, if

any, (only if you have prepaid your

call charge). To reset your timers,

just press »RESET«.

Display Select whether or not the

call timer should be shown in the

display during a conversation.

Setup

Enter the unit price for your

calls (check with your network

operator) and enter the currency of

your call charge. It is also possible

to enter a maximum call charge

limit; no more phone calls can be

made when this maximum has

been reached.

Facts & Tips

• Do not confuse Auto redial with the

call back function described on p. 49.

In the Call back function, the network

automatically connects you to the

busy subscriber when he is no longer

engaged.

• Resetting of timers and setup of call

charge may require you to enter your

PIN2 code.

Setup menu

Call setup

Setup menu

Enter the Setup menu

by pressing »MENU«

Select »Call setup«

Outgoing call ID

Select »Outgoing call ID« to

choose whether or not the persons

you call should be able to see your

phone number.

Speed dial

Activate »Speed dial« to make it

possible to call numbers in your

address or phone books from the

standby display by pressing only

one key.

Select »Define« and specify

which phone number you want to

assign to the keys 1 to 9.

If you should later want to

change something in the se-

quence of the allocated speed dial

numbers, press »SELECT« and

then select »Modify«.

If you want to remove the phone

number from the allocated speed

dial key, select »Remove«.

Caller access

This feature allows you to limit the

number of callers from which you

will accept calls. You can select

whether you want to receive calls

from »All callers«, from a »Single

caller« or from a »Group of callers«.

Having selected »Single caller« or

»Group of callers«you will be asked

to define the entries or groups

from which you will accept calls.

As long as the caller access fea-

ture is activated, you will see this

symbol in the display.

If you receive a call from a num-

ber from which you don’t allow

calls, the call will automatically be

rejected.You will be informed about

the rejected call by the sym-

bol in the display.

Facts & Tips

• Deactivating

»Speed dial«

enables

you to enter letters, symbols and dig-

its in the standby display and thus

enter a USSD message containing

both letters and digits.

• USSD (Unstructured Supple-

mentary Service Data) is a feature

completely defined by your network

which allows direct communication

between you and your network. An

example of using USSD could be if

entering a certain code of digits

and/or letters terminated by # tells

your network to send you a list of

charges.

• If Caller access is activated you can

deactivate it by pressing »MENU«

and . Press the two keys again

in the same order to reactivate the

feature.

First

User guide S40 GB 01/03/02 10:42 Side 58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens s40 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info