Bedienungsanleitung Siemens s40 (Seite 32 von 44) (Englisch)

230430

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Enter the Setup menu

by pressing »MENU«

Select »Message setup«

Send SMS setup

To be able to send and receive

SMS messages you must store the

name and number of the service

centre of your network operator.

However, many network operators

will already have stored this infor-

mation and some other necessary

parameters for you on your SIM

card.

Service centre

The service centre

is where your SMS messages are

forwarded to the recipient. Select-

ing this submenu gives you the fol-

lowing options:

View centres: A list of already

defined service centres will be pre-

sented to you. Press »OPTION« if

you want to edit or delete one of

the service centres.

Under the edit option you can

change the name and number of

the service centre, enter a destina-

tion number to which you want

your messages to be sent, change

the validity time and teleservice

type.

Add new centre: Contact your net-

work operator to get the service

centre number if it is not stored on

your SIM card, and then proceed as

follows:

Select »Add new centre« and

press »OK«.

Press »EDIT«.

Enter the service centre name

and press »OK«.

Enter the service centre num-

ber, destination number, and

select the validity time and

teleservice type in the same

way.

Press »SAVE«.

Default centre: Select the service

centre through which you want

your messages to be sent. If you

select »No default«, you will be

asked to enter the service centre

number, validity time and teleser-

vice type each time you send a

message.

Facts & Tips

• Remember to add "+" and the

national code before the number of

your service centre so you can also

send SMS messages from abroad.

• If you often send messages to the

same number it is an advantage to

store this as your

»Destination num-

ber«

. You will thus only have to con-

firm and not reenter the number each

time you want to send a message.

• The validity time is the period of

time that an SMS message will

remain with your service centre if for

some reason it cannot be delivered

right away.

Setup menu

Call setup

Setup menu

Enter the Setup menu

by pressing »MENU«

Select »Call setup«

Call types (fax/data)

This menu is relevant only if you

are using your phone for fax and

data communications!

The settings on this menu should

be changed only in connection with

fax and data transmissions, if ne-

cessary. Fax and data transmissions

can be made via IrDA or by means

of a separate data cable (optional).

At www.siemens.com/s40 you

will find a modem setup programme

enabling you to change the receiving

data transfer speed into high speed

(HSCSD).

Line selection

Some network operators offer

Alternate Line Service. This allows

you to use two separate speech

lines and phone numbers on the

same telephone. If you have two

separate lines, you can switch

between these by entering this sub

Facts & Tips

• Fax transmission supported is Fax

Class 1.

• When your phone is connected to a

data cable it is not possible to send

and receive via IrDA.

• In the standby display a small num-

ber on the left- or right-hand side of

the signal strength indicator informs

you whether you are on line one or

line two (only if you have Alternate

Line Service).

First First

Message setup

User guide S40 GB 01/03/02 10:42 Side 60

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens s40 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info