Bedienungsanleitung Skil 0280 (Seite 12 von 164) (Alle Sprachen)

797781

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

charge the battery pack or machine outside the



Charging improperly or at temperatures outside the





 SERVICE

a) 

person using only identical replacement parts. This

will ensure that the safety of the machine is maintained.

b) Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

LINE TRIMMER SAFETY WARNINGS

• Do not use the machine in bad weather conditions,

especially when there is a risk of lightning. This

decreases the risk of being struck by lightning.

• Thoroughly inspect the area for wildlife where the

machine is to be used. Wildlife may be injured by the

machine during operation.

• Thoroughly inspect the area where the machine

is to be used and remove all stones, sticks, wires,

bones, and other foreign objects. Thrown objects can

cause personal injury.

• Before using the machine, always visually inspect to

see that the cutter and the cutter assembly are not

damaged. Damaged parts increase the risk of injury.

• Before use, check the supply cord and any

extension cord for signs of damage or aging. Do not

use the machine if the cord is damaged or worn.

If the cord is damaged or worn during use, switch



disconnecting it from the supply. A damaged supply



and/or serious injury.

• Follow instructions for changing accessories.

Improperly tightened blade securing nuts or bolts

may either damage the blade or result in it becoming

detached.

• Wear eye, ear, head and hand protection. Adequate



debris or accidental contact with the cutting line or blade.

• 

and protective footwear. Do not operate the machine

when barefoot or wearing open sandals. This

reduces the chance of injury to the feet from contact with

the moving cutters or lines.

• While operating the machine, always wear long

trousers. Exposed skin increases the likelihood of injury

from thrown objects.

• Keep bystanders away while operating the machine.

Thrown debris can result in serious personal injury.

• Always use two hands when operating the machine.

Holding the machine with both hands will avoid loss of

control.

• Hold the machine by insulated gripping surfaces

only, because the cutting line or blade may contact

hidden wiring or its own cord. Cutting line or blades

contacting a “live” wire may make exposed metal parts of

the machine “live” and could give the operator an electric

shock.

• Always keep proper footing and operate the

machine only when standing on the ground. Slippery

or unstable surfaces may cause a loss of balance or

can cause severe injury within a fraction of a second.

 MACHINE USE AND CARE

a) Do not force the machine. Use the correct machine

for your application. The correct machine will do the job

better and safer at the rate for which it was designed.

b) Do not use the machine if the switch does not turn it

Any machine that cannot be controlled with

the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from the

machine before making any adjustments, changing

accessories, or storing machines. Such preventive

safety measures reduce the risk of starting the machine

accidentally.

d) Store idle machines out of the reach of children and

do not allow persons unfamiliar with the machine or

these instructions to operate the machine. Machines

are dangerous in the hands of untrained users.

e) Maintain machines and accessories. Check for

misalignment or binding of moving parts, breakage



machine’s operation. If damaged, have the machine

repaired before use. Many accidents are caused by

poorly maintained machines.

f) Keep cutting machines sharp and clean. Properly

maintained cutting machines with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the machine, accessories and machine bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. 

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the machine in unexpected situations.

 BATTERY MACHINE USE AND CARE

a) 

manufacturer. A charger that is suitable for one type



another battery pack.

b) 

battery packs. Use of any other battery packs may



c) When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns



d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact



contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or machine that is





explosion or risk of injury.

f) 

excessive temperature. 

above 130 °C may cause explosion.

g) Follow all charging instructions and do not

Skil 0280 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info