Bedienungsanleitung Skil 0280 (Seite 13 von 164) (Alle Sprachen)

797781

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the



• Only use the following batteries and chargers with

this tool

-SKIL battery: BR1*41****

-SKIL charger: CR1*41****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4

burn battery for any reason

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 

debris

7 Wear protective glasses and hearing protection

8 Do not expose tool to rain

9 Do not dispose of electric tools and batteries together

with household waste material

p Disconnect battery before maintenance

a The distance between the machine and bystanders shall

be at least 15 m

s Do not use metal blades

USE

• Assembly instructions

-w

-mount the guide handle C between the hinge D and the

sleeve J as illustrated e

-guide handle C can be adjusted by loosening/

tightening knob H

-mount cutting guard G as illustrated with 2 screws r

! never use the tool without cutting guard G

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

! NEVER remove the battery pack at a high location.

• t

-

cannot be locked) and then pulling trigger switch L

-

! 

continues to rotate for a few seconds

-allow the cutting line to stop rotating before switching

on again

! 

• Battery level indicator q

-press the battery level indicator button M to show the

current battery level qa

! when the lowest level of the battery indicator



qb, the battery is nearly depleted.

• Battery protection



control of the machine.

• Do not operate the machine on excessively steep

slopes. This reduces the risk of loss of control, slipping

and falling which may result in personal injury.

• When working on slopes, always be sure of your

footing, always work across the face of slopes,

never up or down and exercise extreme caution

when changing direction. This reduces the risk of

loss of control, slipping and falling which may result in

personal injury.

• Keep the supply cord away from the cutter, line or

blade. A damaged supply cord may result in electric



• Keep all parts of the body away from the cutter,

line or blade when the machine is operating. Before

you start the machine, make sure the cutter, line

or blade is not contacting anything. A moment of

inattention while operating the machine may result in

injury to yourself or others.

• Do not operate the machine above waist height.

This helps prevent unintended cutter or blade contact

and enables better control of the machine in unexpected

situations.

• When cutting brush or saplings that are under

tension, be alert for spring back. When the tension



strike the operator and/or throw the machine out of

control.

• Use extreme caution when cutting brush and

saplings. The slender material may catch the blade and



• Maintain control of the machine and do not touch

cutters, lines or blades and other hazardous moving

parts while they are still in motion. This reduces the

risk of injury from moving parts.

• When clearing jammed material or servicing the



and the power cord is disconnected. Unexpected

starting of the machine while clearing jammed material or

servicing may result in serious personal injury.

• 

and away from your body. Proper handling of the

machine will reduce the likelihood of accidental contact

with a moving cutter, line or blade.

• Only use replacement cutters, lines, cutting heads

Incorrect

replacement parts may increase the risk of breakage and

injury.

•  If you strike a foreign object with

the trimmer or it becomes entangled, stop the machine

immediately, check for damage and have any damage

repaired before further operation is attempted. Do not

operate with a broken guard or spool.

• If the equipment should start to vibrate abnormally,

stop the motor and check immediately for the cause.

Vibration is generally a warning of trouble. A loose head



may result in serious or fatal injury. Make sure that the





Never use a trimmer with a loose cutting attachment.

SAVE THESE INSTRUCTIONS!

BATTERIES

• The battery supplied is partially charged (to ensure

Skil 0280 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info