Bedienungsanleitung Skil 0760 (Seite 6 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

480084

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite



High-pressure washer 0760

INTRODUCTION

• This tool has been designed for cleaning areas and

objects outside the house, vehicles and boats

• This tool is intended for domestic use only and is not

designed to operate with water from sources other than a

watertap

• This tool is not intended for professional use

• Read this instruction manual carefully before use

and save it for future reference 3

• Pay special attention to the safety instructions and

warnings; failure to follow these may result in

serious injury

• Check whether the packaging contains all parts as

illustrated in drawing 2

• When parts are missing or damaged, please contact your

dealer

TECHNICAL SPECIFICATIONS 1

Working pressure (P) 7 MPa

Maximum working pressure (Pmax) 10 MPa

Inlet pressure 0 - 0,6 MPa

TOOL ELEMENTS 2

A Trigger lock

B Trigger

C Inlet connector

D Water inlet

E Water lter

F Mains switch

G Spraying nozzle

H Detergent bottle

J Detergent nozzle

K Spray lance

L Hand gun

M Cleaning needle

N Storage rail (screws not supplied)

P Storage strap (2)

Q High-pressure hose

R Water outlet

S Ventilation slots

T Connection for storage straps

SAFETY

GENERAL

• Use the tool and its accessories in accordance with this

instruction manual and in the manner intended for the

tool; use of the tool for operations, dierent from those

normally expected to be performed by the tool, could

result in a hazardous situation

• Never draw in solvent-containing liquids, undiluted

acids or solvents (e.g. petrol, paint thinners, heating

oil); these liquids produce a highly ammable, explosive

and toxic sprayed vapour and they also corrode the tool

components

• Only use the tool when the ambient temperature is

between 0°C and 40°C

• Start working only when tool and operating

equipment are in perfect condition and safe to

operate

• Be aware of the kickback forces that occur when starting

the high-pressure washer; hold hand gun and spray

lance rmly and take a secure stance

• Never clamp the trigger in position during operation

• Never direct the water jet towards other people,

animals, live electrical equipment or the tool itself 4

• Never leave the tool unattended while the motor is

running

• Do not operate the tool in potentially explosive locations

• Always switch off tool, disconnect plug from power

source, and ensure there is no water pressure in

tool and hand gun before adjusting, cleaning or

changing accessories

PERSONAL SAFETY

• This tool is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use of the

tool by a person responsible for their safety

• Ensure that children do not play with the tool

• Wear suitable protective clothing to protect against

splashing water

• Do not use the tool with other persons in the vicinity

unless they wear protective clothing

• Do not spray materials containing asbestos and other

materials which contain substances which are hazardous

to your health

• Only clean tyres/tyre valves from a minimum distance of

30 cm to prevent damaging them (damaged vehicle tyres

may lead to fatal accidents)

• Do not direct the water jet against yourself or others

in order to clean clothes or footwear

WATER SUPPLY

• Only use the high-pressure hose and coupling

supplied with the tool

• Replace a damaged high-pressure hose immediately

(with identical specications)

• Do not kink or drive a motor vehicle over the high-

pressure hose

• Do not expose the high-pressure hose to sharp edges or

corners

• Ensure that all connecting hoses have properly sealed

joints

• Be aware that the sprayed water generated by the

tool is not drinkable

• According to the applicable regulations, the tool must

never be used on the drinking water net without a system

separator 5; use a suitable system separator as per

EN 12729 type BA

ELECTRICAL SAFETY

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools with

a rating of 230V or 240V can also be connected to a

220V supply)

• Connect the tool via a fault current (FI) circuit breaker

with a triggering current of 30 mA maximum

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0760 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info