12
CONTROLS AND EQUIPMENT
6 - TIM button
Up to 9 trafc information reports with a total
length of 4 minutes can be stored automatically
with the TIM function (Trafc Information Memory)
in the quality of a telephone conversation. This
function uses a digital memory.
Recording trafc reports
You have 3 different possibilities to record trafc
announcements:
l When the radio is switched on, every trafc
announcement of the selected station will be re-
corded as soon as „TP“ appears in the display.
l Recording period: 2 hours
1 - Switch
on the TP ready mode with the TP
button 3 and select the required TP station by
pressing the trafc radio rocker switch 7.
2 - Remove the ignition key.
All incoming trafc announcements will now be
recorded for the next 2 hours.
l Using
the functions TIM Time 1 and TIM Time
2, the TP recording function can be made avail-
able for a period of 2 hours. Trafc announce-
ments will be recorded during this period - see
page 8.
Note
l T
he oldest report will be deleted if a new report
is to be recorded and the memory is full.
l I
f a report is longer than 4 minutes the be-
ginning will be recorded over. An acoustic signal
will indicate that it was not possible to record the
entire report.
l No
trafc announcements will be recorded if
the vehicle is not used for three days or longer.
7 - Trafc radio rocker switch
Listening to trafc reports chronologically
Press the TIM button 6 - the most recent trafc
report will be played rst and the reports will then
be played in chronological order through to the
oldest. „TP Memo 2/3“, for example.
„TP-Memo“: TIM replay
„2/3“: 2nd trafc announcement of three recorded
trafc announcements.
„No TP Message“ will appear in the display if no
trafc reports have been recorded.
Listening to trafc reports in any order
l Press the TIM button 6.
l M
ove from message to message with the
trafc radio rocker switch 7 by pressing the right
side (next message) and the left side (previous
message) or to the beginning of a message.
