Bedienungsanleitung Smeg FL 102 A (Seite 2 von 7) (Englisch)

73929

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Instructions for Use 25

• Every now and then check if the appliance is

sufficiently ventilated (adequate air

circulation behind the appliance).

• Turn the thermostat knob from higher to

lower setting as soon as possible (depends

on how loaded the appliance is, ambient

temperature...).

• Before loading the appliance with fresh food,

make sure it was cooled to ambient

temperature. (except for the soup)

• Ice and frost layer increase energy

consumption, so do clean the appliance as

soon as the layer is 3-5 mm thick.

• If the gasket is damaged or if it turns out that

the sealing is poor, the energy consumption

is substantially higher. To restore efficiency,

replace the gasket.

• The condenser on the rear wall should be

always clean, free of dust or any impurities.

• Always consider instructions stated in

sections Positioning and Energy Saving

Tips, otherwise the energy consumption is

substantially higher.

Important

• If you have bought this appliance to replace

an old one equipped with a lock that cannot

be opened from inside (lock, bolt), make

sure that the lock is broken. This will make it

impossible for children to lock themselves

inside the appliance and suffocate.

• The appliance must be correctly connected

to the mains supply. (see: Connecting to the

Mains Supply).

• If the food has strange smell or color, throw

it away, because it is very likely that it is

spoiled and therefore dangerous to eat.

• Disconnect the appliance from the power

supply before repairing it (only a qualified

technician should repair it), before cleaning

and before replacing the light bulb.

• Do not defrost the appliance with other

electric appliances (as for example with hair

dryer) and never scrape the frost layer with

sharp objects. Use only enclosed tools or

tools recommended by the manufacturer.

• For the sake of environment protection - be

careful not to damage the rear wall of the

appliance (the condenser unit or the tubes -

for example when moving the appliance) or

any part of the refrigerating system inside

the appliance. Do not use sharp object for

defrosting the appliance. Use only enclosed

tools or tools recommended by the

manufacturer.

• The refrigerating system of the appliance is

filled with refrigerant and oil, so when the

appliance is damaged, handle it with care

and dispose it of in compliance with

environmental protecting precautions. (See

We Care for the Environment).

• In the supply cord is damaged, it must be

replaced by the manufacturer or his service

agent or a qualified person in order to avoid

hazard.

• The rating plate is inside the appliance or

outside on the rear wall.

Disposing of the Worn Out Appliance

• When your appliance finally wears out,

dispose it of. If the appliance has a lock,

break it, in order to prevent eventual

accidents (danger of children get locked

inside the appliance).

• The refrigerating system of the appliance is

filled with refrigerant and insulating

substances which should be separately

treated and processed. Call your nearest

authorised service agent or specialised

servicing centre. If you don't find one,

contact your local authorities or your

distributor. Be careful not to damage the

tubes on the rear wall of the appliance

(danger of pollution)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Smeg FL 102 A Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info