Bedienungsanleitung Snom M300 (Seite 79 von 84) (Englisch)

621561

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

v1.06

Admin and Installation Guide M700, M300 Description of Settings

Setting Description

MAC address The media access control (MAC) address is a unique identier assigned by the

manufacturer. Printed on device's label and on Home page of web interface.

IP address The Internet Protocol address assigned by the network the base station is

located in.

IP status Current base station status in the SME network.

This unit: Indicates that you are looking at this base station's web interface.

Connected: The base station is online in the network.

Connection lost: The connection to the base station has been lost.

DECT sync source The drop-down menu contains the RPNs of each of the currently connected

base stations followed (in parentheses) by the strength of the respective radio

signal (RSSI) in dBm, as received by the base station whose web interface you

are currently accessing. The maximum number of multicell chain levels is 12.

• When the DECT system setting Auto congure DECT sync source tree is

set to "enabled", the sync source tree will be generated automatically.

• When the setting is "disabled", the sync source tree must be congured

manually by selecting each base station's sync source from the drop-

down menu.

The visible option shows which sync source each of the base stations in the

DECT chain is currently using. If you select a dierent option, the chain must

be rebooted. Options:

Select as primary: This option is visible when the base station is selected

as the primary. Select from the drop-down menu of a secondary base

station to make that base station the primary.

Primar y:RPNxx (-xxdBm): This option is visible when the base station is

a secondary level base station whose sync source is the primary.

Example: Primary:RPN00 (-72dBm)

Levelx: RPNxx (-xxdBm): This option is visible when the base station is a

secondary level base station whose sync source is another secondary

level base station.

Example: Level1:RPN04 (-68dBm)

(any) R PN: Indicates a base station that is not synchronized to any other base

station.

DECT property Base station characteristics in connection to the current multi cell network.

Possible output(s):

• Primary: Primary base station all other nodes in the chain synchronize to.

• Locked: The base station is currently synchronized and locked to the

primary.

• Searching: The base station is in the process of locating to a DECT sync

source.

• Free Running: A locked base station that suddenly lost synchronization to

the primary.

• Cell empty: No current connection information from base station.

• Assisted lock: Base station has lost DECT sync source, and Ethernet is

used for synchronization.

• Sync. Lost: Handset has an active DECT connection with the base station

but the base station has lost connection to DECT sync source. The base

station will continue to work as long as the call is active, then go into search

mode when the call is terminated.

Base station name Base station name that was assigned to the base station in the Management

settings and that also appears at the top of its web interface, within the base

station group, and in the DECT chain of a multicell installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snom M300 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snom M300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info