Bedienungsanleitung Snooper S6-R Neo (Seite 10 von 20) (Englisch)

619691

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

EARPHONE

ANTENNA

Next feed the cable from the GPS antenna ensuring that it does not

interfere with any of the vehicles controls to the position where you are

going to locate the S6 GPS Control Panel ready for connection.

Installing the S6-GPS Control Panel

Find a suitable position to mount the S6 Control Panel, remembering that

you will need to be able to remove it easily for downloading purposes.

The unit needs to be situated in a position where you can easily view the

LCD display without having to take your eyes too far from the road and so

that you can reach the controls safely. You will also need to be sure that

you can connect both the power and RLD (if required) connection cables

as well as the extension GPS antenna. There are numerous ways of

mounting your S6 — On the dashboard using the mounting bracket or

hook and loop fastener provided, on the windscreen with the suction-cup

bracket provided or by purchasing a custom-fit bracket designed

specifically to fit your make and model of vehicle.

Be careful to choose a location that does not block the drivers view or

where it might endanger the driver or passengers should your vehicle

suddenly come to a stop or be involved in an accident.

1. Using the Hook and Loop Fastener

Your S6 can be installed easily with the hook and loop fastener if you

have a sufficiently flat area on your dashboard or centre console.

- Use a damp cloth to thoroughly clean the underside

of the GPS control panel and the area where

you intend to mount your unit.

- With the two parts of the Hook and Loop

fastener still fastened together, peel the

backing tape from the softer ’Loop’ side

of the fastener and apply it to the

underside of the GPS control panel.

- Next remove the backing tape from the

’Hook’ side of the fastener, again whilst

the two parts are still fastened and

position the unit onto the desired area.

If possible leave the Hook and Loop

fastener for 24hrs to adhere properly

before using regularly.

- Plug the end of the lead of the GPS

antenna already mounted, into the

socket marked ’ANTENNA’ on

the side of the control panel.

- See Page 10 for details of

how to connect power to

your unit.

Motorcycle installation

The Snooper S6 and S6-R can both be installed on to your motorcycle.

An earpiece is available as an optional extra so that audible alerts can be

heard.

Instructions for mounting the S6 and S6-R are as per the installation

guide on pages 7 to 12. Remember however that the S6 GPS control

panel is not waterproof so needs to mounted within a tank bag or other

waterproof holder. Always remember that for your S6 or S6-R to work

effectively that the GPS antenna has an open, clear view of the sky and

that if you are installing the S6-RLD it has a clear view of the road ahead,

unobstructed by metallic objects. If you require any further advice on

installation please contact our technical helpline on 0870 787 0700.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper S6-R Neo Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info