Bedienungsanleitung Snooper S6-R Neo (Seite 19 von 20) (Englisch)

619691

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

3. City Mode Button

The CITY mode is operated through the CITY button available on the

Standby screen and has been designed to help reduce unwanted signals

generated by GPS. There are three possible modes to choose from,

’CITY’, ’MOTORWAY’ or ’ALL’. To change from ’CITY’ to ’MOTORWAY’

simply press the button below ’CITY’ on the display once. The icon will

change to ’MWAY’ to confirm your selection. To change from ’MWAY’ to

’ALL’ press the button again. The icon will change to ’ALL’ to confirm your

selection. To return to the ’CITY’ setting press the button once again. The

icon on the display will change to ’CITY’ to confirm your selection.

CITY MODE

In CITY mode the Snooper S6 will ignore any alert generated through

GPS that is actually located on a Motorway that is in range of your device

but not an immediate threat to you, as you are not actually travelling on

that section of road. Important: laser and radar alerts remain unaffected.

Please note that whilst in the CITY mode the device will not detect

any locations on Motorways or ’M’ roads so you need to remember

to switch to either the ’MWAY’ or ’ALL’ settings when driving on a

Motorway or ’M’ road.

MOTORWAY MODE

In MWAY mode the Snooper S6 will ignore any alert generated through

GPS that is actually located on a none Motorway road that is in range of

your device but not an immediate threat to you, as you are not actually

travelling on that section of road. If your speed drops below 20mph the

device will sound an audible alert and ’Switch Modes?’ will be shown on

the display to remind you that you may no longer be travelling on a

section of Motorway and may need to change the mode to ’CITY’ or ’ALL’.

Important: laser and radar alerts remain unaffected.

Please note that whilst in the MWAY mode the device will not detect

any locations on none Motorway roads so you need to remember to

switch to either the ’CITY’ or ’ALL’ settings when leaving an ’M’ type

road.

Satellite Counter — Shows how many satellites your unit can currently see.

2 City Button — Confirms CITY , MWAY or ALL (see below for details).

3 Cancel Button — Used to cancel an alert.

4 Mute Button — Used to cancel an audible alert (see page 18 for details).

5 Menu Button — Used to access Full Logic Menu and set features and

settings.

6 Indicates direction of travel.

7 RD icon confirms if your radar/laser detector is successfully connected.

(This will only appear during start-up if you have S6-RLD connected).

8 Atomic Clock.

9 Shows vehicle speed.

7. Saving new co-ordinates

If in the unlikely event that you pass the location

of a Safety Camera and your Snooper S6 does

not provide an alert, the S6 gives you the

opportunity to upload the co-ordinates of the

location manually. Simply park safely as close

as possible to the site and press the new

location button. An icon will appear on the

display to confirm that the location has been

saved successfully. Next time you perform a

download you will get the opportunity to upload

the new site for verification. If verified successfully the co-ordinates will

be added to our master database.

If during the period before you perform your next download, you pass the

site again your S6 will now alert you to the new location. As the device

does not know what type of system you are passing the display will

describe it simply as ’MEMO’ and the number of that co-ordinate in the

units memory.

Features & Settings

1.Alert Settings

The Alert Settings allows you to

adjust the distance that your S6 will

detect from when utilising GPS and

also allows you to set the type of

audible warning you hear as the

device alerts you to a location. To

enter ’ALERT SETTINGS’ from the

Standby screen press the button

below ’Menu’ (5) on the LCD display

and then using the buttons below the

Up (3) and Down (4) arrows on the LCD display, scroll until ’ALERT

SETTINGS’ is highlighted. Then simply press the button below ’Select’ (5)

on the display and again use the buttons below the arrows on the display

to highlight the setting, either ’AUDIBLE ALERT’ or ’SET PRE ALERT’

depending on what you would like to adjust. Once you have made your

choice press the ’Select’ button.

AUDIBLE ALERT - There are three

AUDIBLE ALERT settings to choose

from. Using the buttons below the

arrows on the display (3 & 4), choose

between HARD TONE, SOFT TONE

and OFF (no audible alert) and press

the ’Select’ button (5) to confirm your

selection. The display will read

’SETTING CONFIRMED’ and will

return to the Menu screen.

New Location

Button

CANCEL

SELECT

1. ALERT SETTING

RADAR & LASER

3. AUTOMUTE

SOFT TONE

HARD TONE

OFF

3 4 5

2 3 4 5

SUB-MENU

MUTE MENU

CANCEL

SELECT

CANCEL

SELECT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper S6-R Neo Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info