Bedienungsanleitung Solac SW8231 (Seite 10 von 32) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

799214

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English

SEWING MACHINE

SW8231

USE AND CARE:

- 

- Do not use the appliance if the accessories attached to it are defective.

Replace them immediately.

- Never run the machine when there’s thread in the needle, but no fabric

on the machine. This could damage the machine.

- Always keep your hands away from the needle, hand wheel, upper

thread tension dial and pattern selection dial when the appliance is

running.

- 

the sewing machine needle.

- Never sew with a damaged needle plate as this can cause needle to

break.

- Do not use bent needles

- 

causing it to break.

- Never drop or insert any object into any opening.

- 󰀨

- Use the appliance handle/s, to catch it or move it.

- Disconnect the appliance from the mains when not in use and before

undertaking any cleaning task.

- Unplug the appliance from the mains before replacing any accessory.

- This appliance is for household use only, not professional, industrial

use.

- Store this appliance out of reach of children and/or persons with physi-

cal, sensory or reduced mental or lack of experience and knowledge.

- Keep the appliance in a dry, dust-free place, out of direct sunlight.

- Make sure that dust, dirt or other foreign objects do not block the fan

grill on the appliance.

- Keep the appliance in good condition. Check that the moving parts are

not misaligned or jammed and make sure there are no broken parts or

anomalies that may prevent the appliance from operating correctly.

- Use the appliance and its accessories and tools in accordance with

these instructions, taking into account the working conditions and the

󰀨

those intended could result in a hazardous situation.

- Never leave the appliance unattended while in use.

DESCRIPTION

Front view:

1 Take up lever

2 Upper thread tension dial

3 Pattern selection dial

4 Thread cutter

5 Light

6 Needle clamp screw

7 Bpttp, bobbin

8 Drawer

9 Hand wheel

10 Reverse button

11 Selector switch.

 󰀨

11.b. manual (Vel 1/ Vel 2)

Back view:

1 bobbin winder pin

2 Bobbin winder stop

3 Foot pedal input

4 Bobbin winder tension disk

5 Presser foot lifter

6 Presser foot

7 Dc input

If the model of your appliance does not have the accessories described

above, they can also be bought separately from the Technical Assis-

tance Service.

INSTRUCTIONS FOR USE

Before use:

- Make sure that all the product’s packaging has been removed.

- Some parts of the appliance have been lightly greased. Consequently,



After a short time, this smoke will disappear.

- Prepare the appliance according to the function you wish to use:

Using the foot pedal and adaptor

- Connect the foot pedal by inserting the jack into the foot pedal input

socket. Then you can use the foot pedal turn on the machine instead

󰀨

and convenient.

- Connect the adaptor’s jack to the DC input socket (7) on the back of

the machine, and connect the plug to the main power supply.

- CAUTION: make sure the foot pedal is unplugged from the machine

when you’re not using it, so the sewing machine won’t accidentally

start up.

Needle replacement

- 󰀨󰀨

kind of fabric, just follow these steps.

- CAUTION: To prevent injury from accidentally starting up the machine,

󰀨-

tor plug.

- 1. Turn the hand wheel to raise the needle to its highest position. Hold

the old needles and loosen the needle clamp screw. Remove the old

needle and discard responsibly (Fig.1).

- 

correct direction (to the back). Be sure to push the needle completely

into the clamp before tightening the needle clamp screw.

- 3. Tighten the needle clamp screw.

- CAUTION: Needle direction must be correct and be sure to tighten the

thimble screw, to avoid needle fall by accident.

Threading upper THREAD

- 1. Turn the hand wheel to raise the needle to its highest position

- 2. Put a spool on the thread spindle, put on the thread spindle cover

and then pull out the thread.

- 3. Pull the thread and let it passes through the bobbin winder tension

disk

- 4. Guide the thread through the hole in the chromed lever and pull

straight down towards the needle.

- 5. Feed the thread throught the hole in the chromed lever and pull

straight down towards the needle.

- 6. Feed the thread through the hole in the needle holder, then through

the eye of the needle from the front side to the back and pull out 10

cm to the back.

- 󰀨

supply and remove the foot pedal when threading the machine.

Presser foot replacement

Removing the presser foot

- Turn the hand wheel counterclockwise to raise the needle to its highest

position.

Solac SW8231 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info